Temperature|Monitoring|Data|Logger|Recorder|UAE|Kuwait|Saudi Arabia|Oman|Qatar|Iraq
http://www.temperaturemonitoringuae.com/
Vacker Group, UAE is a major supplier in the Middle East countries for all types of Temperature Monitoring Solutions including Temperature Sensors, data loggers, Real time Monitoring, Temperature Monitoring software etc. Vacker Group is authorised dealer for Cryopak, USA for their entire range of Temperature and Humidity Data loggers
This is the U S B type Temperature data logger. There are buttons to Start and Stop recording of the temperature. There are 5 L E D's to indicate whether it has exceeded the programmed levels during the recording. Each U S B is having its own serial numbers which are traceable.
This U S B is programmed for first high limit of 30 Degree Centigrade and Second High Level of 60 Degree. Also the Low Levels are 20 and Zero Degree Centigrade. Now we have started recording by pressing the Start button and are applying high temperature using hot air. You can see that the temperature is rising. The temperature has crossed 30 Degree for 60 seconds and the L E D shown as H started blinking. Now we are applying more hot air and once it crossed 60 Degree the second L E D namely H H is blinking. Now we kept the USB inside a freezer for some time and can see that both L and L L are blinking.
We have been recording the temperature under different conditions for couple of days and have now stopped recording. Now we are inserting into a Laptop. There is no special software or drivers required for the same. You can see that the USB appears on the screen and you can open reports in different formats.
First we will open the p d f report. You can see the report here. Here you can see that the sampling rate of 60 seconds. Further you can see the number of readings, two levels of higher limits and two levels of lower limits. As you saw once the temperature exceeded these limits, the corresponding L E D’s started blinking
Now you can see the graph here. You can see the various points at which the temperature exceeded the programmed limits. You can specifically see the points where we applied hot air and those inside the freezer. Majority of the remaining duration was at room temperature and under the sun. also you can see the benchmark set by pressing the start button
Here you can see the highest and lowest temperature during the recording period.
You can see that all alert levels were activated.
Also the duration for which these temperatures were exceeded can be seen here.
Now we will see the Excel sheet. The pdf report was a summary whereas the excel sheet will give minute by minute reading for the entire duration.
Also the report comes in plain text form which can be seen here.
Thus it can be seen that this USB Data logger provides a cost effective solution for recording temperature for transportation and storage of food, medicine, vaccines, chemicals etc.
contact details:
Vacker LLC, Suite 306, RKM Building, Hor Al Anz, Deira, Dubai
Tel: +971 42 66 1144
Email:sales.uae@vackerglobal.com
Vacker Group, UAE is a major supplier in the Middle East countries for all types of Temperature Monitoring Solutions including Temperature Sensors, data loggers, Real time Monitoring, Temperature Monitoring software etc. Vacker Group is authorised dealer for Cryopak, USA for their entire range of Temperature and Humidity Data loggers
This is the U S B type Temperature data logger. There are buttons to Start and Stop recording of the temperature. There are 5 L E D's to indicate whether it has exceeded the programmed levels during the recording. Each U S B is having its own serial numbers which are traceable.
This U S B is programmed for first high limit of 30 Degree Centigrade and Second High Level of 60 Degree. Also the Low Levels are 20 and Zero Degree Centigrade. Now we have started recording by pressing the Start button and are applying high temperature using hot air. You can see that the temperature is rising. The temperature has crossed 30 Degree for 60 seconds and the L E D shown as H started blinking. Now we are applying more hot air and once it crossed 60 Degree the second L E D namely H H is blinking. Now we kept the USB inside a freezer for some time and can see that both L and L L are blinking.
We have been recording the temperature under different conditions for couple of days and have now stopped recording. Now we are inserting into a Laptop. There is no special software or drivers required for the same. You can see that the USB appears on the screen and you can open reports in different formats.
First we will open the p d f report. You can see the report here. Here you can see that the sampling rate of 60 seconds. Further you can see the number of readings, two levels of higher limits and two levels of lower limits. As you saw once the temperature exceeded these limits, the corresponding L E D’s started blinking
Now you can see the graph here. You can see the various points at which the temperature exceeded the programmed limits. You can specifically see the points where we applied hot air and those inside the freezer. Majority of the remaining duration was at room temperature and under the sun. also you can see the benchmark set by pressing the start button
Here you can see the highest and lowest temperature during the recording period.
You can see that all alert levels were activated.
Also the duration for which these temperatures were exceeded can be seen here.
Now we will see the Excel sheet. The pdf report was a summary whereas the excel sheet will give minute by minute reading for the entire duration.
Also the report comes in plain text form which can be seen here.
Thus it can be seen that this USB Data logger provides a cost effective solution for recording temperature for transportation and storage of food, medicine, vaccines, chemicals etc.
contact details:
Vacker LLC, Suite 306, RKM Building, Hor Al Anz, Deira, Dubai
Tel: +971 42 66 1144
Email:sales.uae@vackerglobal.com