Microneedle Roller

1. Microneedle Roller Recommendations:. Completely clean your hands and the treatment location and dry them with a clean towel. Clean the derma roller with soap and water and spray it with 99 % liquor and let it dry. It is suggested that the treatment location be as sterilized as possible. 2. Ensure that you have all the items required to start your treatment including your derma roller, moisturizer, topicaine gel (if used), antibacterial cream (if used) and any other 3rd party products you might require. (Such as anti dimpled skin cream, hair loss treatment, etc.). 3. Apply topicaine gel/essential onto your treatment location. Using the roller with small pressure; roll the device back and forth four times in four instructions. never utilize the Derma roller on your eyes or lips. The treatment should not be painful and should not injure. You will end up being accustomed to the amount of pressure you can apply without triggering any pain. 4. After treatment, clean your skin with cold water and dry it carefully. Apply Cream to your skin. If you are using the numbing gel, utilize the anti-bacterial cream first. If you are not using numbing gel, apply high quality moisturizer carefully to your skin ideally with vitamin C & E. 5. Clean and Shop the Roller. Wash the roller under hot water completely. If you used the roller with numbing cream, stand the roller in half a glass of disinfectant for approximately 30-60 mins. If not, disinfect your roller on a weekly basis. After washing or disinfecting, get away from the excess fluid on the roller, stand it on a clean towel to dry. Please do not put the device away while it is still dry. Put your roller in the plactic case safely. 4. Frequency: Use the roller as part of your everyday regimen - you can roll every day if you wish although we advise permitting your skin a minimum of a number of days of rest each week. It is possible…