Galaxy S7 Edge: Zagg HD Dry Screen Protector | How To Put On Easy
- 6 years ago
Here I show you guys how to install a Zagg HD Dry Screen Protector for the Samsung Galaxy S7 Edge\r
Here is an Amazon Link : \r
\r
Check out the Bodyguardz Screen Protector: \r
Bodyguardz Const Case: \r
The S7 Zagg Screen Protector: \r
\r
Subscribe Here: \r
\r
The Zagg HD Dry Screen Protector for the S7 Edge is a great screen protector that covers most of the front of the phone. Its a very thick self healing plastic which is really strong especially when I tried to pierce through the screen protector. It feels nice and smooth when using the phone. \r
IMPORTANT:\r
Since the Zagg screen protector covers most of the phone, you need to ENSURE it is aligned perfectly or at least super close to perfect, otherwise if it is misaligned then if you put on a case, it will potentially lift up the sides.\r
\r
Zagg offers an amazing Lifetime Warranty in which all you have to do is register online and if your screen protector gets ruined, you can replace it for free, and pay only shipping. \r
\r
Steps to Install Zagg HD Dry\r
\r
1. Clean the screen using alcohol pad and/or microfiber cloth (to remove lint, dust, debris, oil, etc.)\r
\r
2. Make sure you double check that there are no dust particles/ lint as they will show underneath the screen. \r
\r
3. Take the screen protector and peal off the bottom green tab exposing a portion of the adhesive side. \r
\r
4. Using the tabs, carefully place it closer to the screen while aligning it as PERFECT as possible and place it on the phone. IF its badly aligned simply lift up the bottom and re-try \r
\r
5. Once you have a nice alignment, take the included squeegee and push down the bottom adhesive to make it properly adhere \r
\r
6. With the bottom now adhered, lift the screen from the TOP and TRIPLE CHECK to make sure there are no dust/lint on the screen \r
\r
7. With the screen lifted up with one hand, with your other hand use the squeegee and start pushing down the screen protector from the bottom and work your way all the way to the top \r
\r
8. Once the screen protector is on the phone, use the squeegee and push down the sides once (it wont fully adhere yet)\r
\r
9. Carefully peel the top layer from the top (Keep in mind that the sides are not yet fully adhered to the sides yet)\r
\r
10. Wrap the included microfiber cloth around the squeegee (to protect from scratching) and push down the sides. \r
\r
TIPS:\r
There may be bubbles around the screen in which you can air out carefully with the squeegee. ANY remaining MICRO BUBBLES SHOULD DISAPPEAR within 24-48 Hours as it says in the Instructions\r
\r
- Fire Frost Tech
Here is an Amazon Link : \r
\r
Check out the Bodyguardz Screen Protector: \r
Bodyguardz Const Case: \r
The S7 Zagg Screen Protector: \r
\r
Subscribe Here: \r
\r
The Zagg HD Dry Screen Protector for the S7 Edge is a great screen protector that covers most of the front of the phone. Its a very thick self healing plastic which is really strong especially when I tried to pierce through the screen protector. It feels nice and smooth when using the phone. \r
IMPORTANT:\r
Since the Zagg screen protector covers most of the phone, you need to ENSURE it is aligned perfectly or at least super close to perfect, otherwise if it is misaligned then if you put on a case, it will potentially lift up the sides.\r
\r
Zagg offers an amazing Lifetime Warranty in which all you have to do is register online and if your screen protector gets ruined, you can replace it for free, and pay only shipping. \r
\r
Steps to Install Zagg HD Dry\r
\r
1. Clean the screen using alcohol pad and/or microfiber cloth (to remove lint, dust, debris, oil, etc.)\r
\r
2. Make sure you double check that there are no dust particles/ lint as they will show underneath the screen. \r
\r
3. Take the screen protector and peal off the bottom green tab exposing a portion of the adhesive side. \r
\r
4. Using the tabs, carefully place it closer to the screen while aligning it as PERFECT as possible and place it on the phone. IF its badly aligned simply lift up the bottom and re-try \r
\r
5. Once you have a nice alignment, take the included squeegee and push down the bottom adhesive to make it properly adhere \r
\r
6. With the bottom now adhered, lift the screen from the TOP and TRIPLE CHECK to make sure there are no dust/lint on the screen \r
\r
7. With the screen lifted up with one hand, with your other hand use the squeegee and start pushing down the screen protector from the bottom and work your way all the way to the top \r
\r
8. Once the screen protector is on the phone, use the squeegee and push down the sides once (it wont fully adhere yet)\r
\r
9. Carefully peel the top layer from the top (Keep in mind that the sides are not yet fully adhered to the sides yet)\r
\r
10. Wrap the included microfiber cloth around the squeegee (to protect from scratching) and push down the sides. \r
\r
TIPS:\r
There may be bubbles around the screen in which you can air out carefully with the squeegee. ANY remaining MICRO BUBBLES SHOULD DISAPPEAR within 24-48 Hours as it says in the Instructions\r
\r
- Fire Frost Tech