https://www.tngun.com/ar-15-lower-build/
I'm no lawyer, so check this yourself. My understanding is that as long as you can legally own a rifle you can make one for your own use (NOT WITH INTENT TO RESALE). The firearm you build must meet the legal guidelines in your area (i.e no 3 inch anti-aircraft guns).
If you can do so legally, building your own rifle is a very worthwhile experience - in this post we will show how we completed out own AR-15 lower build for much cheaper than what the same rifle would have cost already assembled.
When I bought my stripped AR-15 Lower Receiver, I had to give my $10 background check and thumbprint just like I was buying a functional firearm. According to BATFE, a receiver is considered a firearm even if it is is not functional, and all the other parts are just "accessories".
This is the second AR-15 lower I have built, and it took me less than an hour. I did not have any specialty tools to make it easier. I would say that this is a simple project if you have good instructions.
You can use the military technical manual (TM-9-1005-319-23&P) but remember its for M-16s so some of the fire control parts will look different because your rifle is semi-automatic. You can search the internet for AR-15 construction guides, or even buy a book in your local bookstore if you live in the right place.
On our main site www.tngun.com under documents, there is a couple AR-15/M-16 manuals that will help you. I suggest you visit AR-15.com and look in their forums as they have great step by step instructions.
Some steps can be done in any order, and some pins can be installed from either side, but some steps need to be done in sequence, and certain pins need to be placed a specific way, so be sure you get a decent set of instructions and follow them.
I build my own lowers for two reasons, the first is cost. I save about 100 dollars (sometimes more) by DIYing them, but I also like the feeling of taking MY gun to the range. By putting one together you learn a lot about your rifle which makes troubleshooting and repair a lot easier.
I had to split up the video into two parts and seriously cut it for time, as youtube has a strict 10 minute video policy. Also for those that get torqued over someone calling a magazine a clip, there are several occasions where I misspoke a part name, you make me nervous....
I'm no lawyer, so check this yourself. My understanding is that as long as you can legally own a rifle you can make one for your own use (NOT WITH INTENT TO RESALE). The firearm you build must meet the legal guidelines in your area (i.e no 3 inch anti-aircraft guns).
If you can do so legally, building your own rifle is a very worthwhile experience - in this post we will show how we completed out own AR-15 lower build for much cheaper than what the same rifle would have cost already assembled.
When I bought my stripped AR-15 Lower Receiver, I had to give my $10 background check and thumbprint just like I was buying a functional firearm. According to BATFE, a receiver is considered a firearm even if it is is not functional, and all the other parts are just "accessories".
This is the second AR-15 lower I have built, and it took me less than an hour. I did not have any specialty tools to make it easier. I would say that this is a simple project if you have good instructions.
You can use the military technical manual (TM-9-1005-319-23&P) but remember its for M-16s so some of the fire control parts will look different because your rifle is semi-automatic. You can search the internet for AR-15 construction guides, or even buy a book in your local bookstore if you live in the right place.
On our main site www.tngun.com under documents, there is a couple AR-15/M-16 manuals that will help you. I suggest you visit AR-15.com and look in their forums as they have great step by step instructions.
Some steps can be done in any order, and some pins can be installed from either side, but some steps need to be done in sequence, and certain pins need to be placed a specific way, so be sure you get a decent set of instructions and follow them.
I build my own lowers for two reasons, the first is cost. I save about 100 dollars (sometimes more) by DIYing them, but I also like the feeling of taking MY gun to the range. By putting one together you learn a lot about your rifle which makes troubleshooting and repair a lot easier.
I had to split up the video into two parts and seriously cut it for time, as youtube has a strict 10 minute video policy. Also for those that get torqued over someone calling a magazine a clip, there are several occasions where I misspoke a part name, you make me nervous....
Category
🛠️
Lifestyle