Guy Creates Self Balancing DIY Robot
This guy showed off his skills by creating a self-balancing robot. He started his project with a diagram and then cut parts off the cardboard for the same. After fixing the female and the male header, he glued and screwed all the pieces together and attached two tires at the bottom. He then attached a sensor in it and adjusted the rate of the module. He successfully displayed his talent as he could operate the robot via his phone and make it move in all the directions.
Transcript
00:00♪♪
00:10♪♪
00:20♪♪
00:30♪♪
00:40♪♪
00:50♪♪
01:00♪♪
01:10♪♪
01:20♪♪
01:30♪♪
01:40♪♪
01:50♪♪
02:00♪♪
02:10♪♪
02:20♪♪
02:30♪♪
02:40♪♪
02:50♪♪
03:00♪♪
03:10♪♪
03:20♪♪
03:30♪♪
03:40♪♪
03:50♪♪
04:00♪♪
04:10♪♪
04:20♪♪
04:30♪♪
04:40♪♪
04:50♪♪
05:00♪♪
05:10♪♪
05:20♪♪
05:30♪♪
05:40♪♪
05:50♪♪
06:00♪♪
06:10♪♪
06:20♪♪
06:30♪♪
06:40♪♪
06:50♪♪
07:00♪♪
07:10♪♪
07:20♪♪
07:30♪♪
07:40♪♪
07:50♪♪
08:00♪♪
08:10♪♪
08:20♪♪
08:30♪♪
08:40♪♪
08:50♪♪
09:00♪♪
09:10♪♪
09:20♪♪
09:30♪♪
09:40♪♪
09:50♪♪
10:00♪♪
10:10♪♪
10:20♪♪
10:30♪♪
10:40♪♪
10:50♪♪
11:00♪♪
11:10♪♪
11:20♪♪
11:30♪♪
11:40♪♪
11:50♪♪
12:00♪♪
12:10♪♪
12:20♪♪
12:30♪♪
12:40♪♪
12:50♪♪