GPON OLT Configuration - GPON OLT Config TAG Trunk Method - Tenda TES7008 V1 GPON OLT -- iTinfo

C DATA GPON OLT Config as a Uplink Trunk and all PON Ports Trunk on VLAN 100. We will config C-Data GPON OLT on Putty command line. you can easily config this OLT by watching my video. We will create service profile , line profile as well then allow these profile on every ONT. you can use Tenda ONT for better performance.
Tenda GPON OLT "TES7008" is 1U rack-mounted device with1 USB interface, 4 uplink GE ports, 4 uplink optical ports, 2 10-gigabit uplink ports and 8 GPON ports, each GPON port supports the splitting ratio of 1:128 and provides downstream bandwidth of 2.5Gbps and upstream bandwidth of 1.25Gbps,system support 1024 GPON terminals accessing in for the most .
You can easily config Tenda Gpon OLT TES7008.
Just copy and paste bellow commands on Terminal.
*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈
enable
config
ont-lineprofile gpon profile-id 1 profile-name "lineprofile_1"
#tcont 0 dba-profile-id 0
tcont 1 dba-profile-id 1
gem add 1 tcont 1 encrypt off
gem mapping 1 1 vlan transparent
commit
exit
!
interface gpon 0/0
ont autofind all enable
ont authmode all manual
ont policy-auth all enable
exit
!
ont policy-auth enable
ont policy-auth policy all ont-lineprofile-id 1 ont-srvprofile-id 0
vlan 2-4094
!