Charlotte and Alex Save the Toy Waterpark from a Clogged Pipe with Teamwork
- last year
Hey kids, welcome to our toy waterpark! As you can see, the water isn't flowing properly and some of the features are not working. Charlotte and Alex investigated and found out that there's a clogged pipe that's preventing the water from running.
To fix this problem, we'll need to locate the clogged pipe and remove the blockage. But first, let's learn a bit more about how the water flows in the park. You see, there's a water pump that draws water from a pool and sends it through a series of pipes and features, like the slides, fountains, and waterfalls. If one of the pipes gets clogged, the water can't reach its destination and the feature won't work.
So, let's find the clogged pipe. We'll need to follow the water flow and listen for any unusual sounds, like gurgling or bubbling. Once we locate the pipe, we'll need to remove the blockage. We can use a long stick or a wire to poke through the pipe and loosen the debris. Then, we can flush the pipe with some water to make sure it's clean.
But be careful, kids! Don't poke too hard or too deep, or you might damage the pipe. And don't touch any electrical parts, like the pump or the wiring, unless you're supervised by an adult.
Once the clogged pipe is fixed, we should see the water flowing again and the features working properly. Hooray, we did it! Thanks for watching, and don't forget to like and subscribe for more fun videos like this!
Subscribe to our channel:
/ @toysplay
Watch more of our latest videos on our playlist:
• Funny Aunties & U...
#ToysPlay #PretendPlay #ToysandColors
Try YouTube Kids
LEARN MORE
Comments are turned off. Learn more
To fix this problem, we'll need to locate the clogged pipe and remove the blockage. But first, let's learn a bit more about how the water flows in the park. You see, there's a water pump that draws water from a pool and sends it through a series of pipes and features, like the slides, fountains, and waterfalls. If one of the pipes gets clogged, the water can't reach its destination and the feature won't work.
So, let's find the clogged pipe. We'll need to follow the water flow and listen for any unusual sounds, like gurgling or bubbling. Once we locate the pipe, we'll need to remove the blockage. We can use a long stick or a wire to poke through the pipe and loosen the debris. Then, we can flush the pipe with some water to make sure it's clean.
But be careful, kids! Don't poke too hard or too deep, or you might damage the pipe. And don't touch any electrical parts, like the pump or the wiring, unless you're supervised by an adult.
Once the clogged pipe is fixed, we should see the water flowing again and the features working properly. Hooray, we did it! Thanks for watching, and don't forget to like and subscribe for more fun videos like this!
Subscribe to our channel:
/ @toysplay
Watch more of our latest videos on our playlist:
• Funny Aunties & U...
#ToysPlay #PretendPlay #ToysandColors
Try YouTube Kids
LEARN MORE
Comments are turned off. Learn more