Getting the right gearing for you gravel bike is essential if you want to enjoy your off-road adventures.
Category
🥇
SportsTranscript
00:00 There has been a trend in off-road riding in recent years, and that is a reduction in
00:04 the number of chainrings on your bike and an increase in the size of the cassette.
00:09 In this video, we're going to let you in on the five key things you need to know about
00:13 gearing before choosing your gravel bike.
00:24 To calculate the number of gears your bike have, you need to take the number of sprockets
00:28 on your cassette and times it by the number of chainrings, which should mean that a two-by
00:33 setup is instantly the winner.
00:35 Yes, well, that's technically true that it does have more gears, but it's actually the
00:39 ratio of the gears and the range of the gears that has the biggest impact on how it rides.
00:44 That will be a little bit different for on and off-road riding too.
00:48 By range, we mean the spread in your gears.
00:52 The bigger your range, the smaller your smallest gear can be and the bigger your biggest gear
00:57 can be.
00:58 For example, with a two-by setup, say with Shimano's GRX system, that can have a 48-tooth
01:05 largest ring on the front and a 31-tooth smallest ring on the front.
01:09 It can pair that with a 34-tooth cassette on the back.
01:13 Those two chainrings on the front have a massive 17-tooth jump between them.
01:18 That is huge.
01:19 Now, this is similar to SRAM's AXS system, which can use a 43 and a 30-tooth chainring
01:24 on the front and pair that with the lowest gear of a 36-tooth sprocket.
01:28 Now, these massive ranges of gears are particularly beneficial if you're planning on using your
01:33 bike on both the tarmac, so a bit of road riding, but also if you plan to be winching
01:38 yourself up off-road climbs laden with heavy bikepacking bags.
01:42 Now, that's not to say that you can't get a really good range with one-by.
01:45 Typically, on the front chainring, you might run something like a 38, 40, or 42-tooth chainring.
01:52 Then on the back, you can get something like a 10 or 11-to 42.
01:56 However, increasingly popular is a mullet setup, so business at the front and party
02:01 at the back, where you have typically a gravel-specific chainring setup and then mountain biking-specific
02:09 equipment at the back in terms of your cassette and your rear mech.
02:12 That could be anything up to a huge 10-to-50-tooth cassette, which is phenomenal for winching
02:18 up the really steep stuff.
02:20 Now, if you are running a cassette that large on the back with a one-by setup on the front,
02:25 you are more likely to notice the jumps between the gears when you shift.
02:29 This can affect your cadence.
02:30 Now, cadence is how comfortable it feels to pedal, so how quickly your legs are spinning
02:35 and how easy it feels to move the bike along the trail.
02:39 With a bigger cassette, all of the shifting is put at the rear, which is this offset if
02:44 you use a two-by chainring because the bigger jump is at the front.
02:48 Remember that 17-tooth jump I spoke about?
02:50 This allows you to then have much tighter spacing on the rear cassette, so you can
02:54 have nice incremental gear changes of much smaller number of tees.
02:59 Now, this is particularly useful if you live somewhere which isn't particularly hilly,
03:03 or if it is hilly, there are consistent gradients, so you don't need to be dunking loads of gears
03:08 because you can just make nice little minute changes on the rear cassette, and it can be
03:12 much more comfortable on your legs.
03:14 However, if you're riding off-road and you have a one-by setup, you're less likely to
03:18 notice these bigger shifts in the gearing because you tend to be going a lot slower,
03:22 for example, if you're doing a technical climb.
03:24 Now, what I really love about a one-by system is the simplicity of it.
03:33 It's simply one lever to shift up and one lever to shift down.
03:38 So if you're guilty of cross-chaining when on the road with a double like me, it's really,
03:43 really easy because you don't have to worry about making sure that you're in the middle
03:46 of the cassette when you change the chainring.
03:48 And if you're riding off-road, it's just one less thing to think about and makes it super
03:52 easy and simple.
03:53 Now, among the many other benefits of one-by, it's also a bit lighter.
04:04 You don't need a second chainring, a front mech, and all the other gubbins that comes
04:07 with that.
04:08 It's about 250 grams lighter.
04:09 Yeah, but how can it be that light when you're also running that much bigger cassette?
04:13 Ah, yeah, well, it's more aero.
04:15 Says who?
04:16 You're covered in mud and you've got your bike bags on.
04:18 That's hardly aerodynamic.
04:19 Okay, well, I just like how it looks.
04:22 Yeah, fair enough.
04:23 I do think it actually looks nicer than a double chainring.
04:26 Now, lastly comes my favourite point, which is about reliability, especially if you're
04:36 heading out into an area such as this where you're quite remote from a good bike shop
04:41 or some help.
04:42 And that's because you don't have a front mech on the one-by system.
04:44 It's just one less thing to go wrong.
04:46 Now, there is a minor argument to make here that a two-by system is less wearing on the
04:53 parts of your drivetrain.
04:54 So, your chain is going to wear less because it's got a more efficient line and your cassette
04:58 is going to wear less as a result of that.
05:00 But I will admit it's a minor argument when you're riding off-road and you're riding in
05:05 the rain and just really muddy trails.
05:08 It's not going to make that much difference.
05:10 So, there you go.
05:14 The points for both one-by and two-by systems.
05:18 Really depends on use case, but obviously go for a two-by setup.
05:21 Absolutely one-by.
05:22 Well, it looks like we're not going to come to a conclusion together.
05:26 So, why don't you let us know in the comment section below what you think.
05:29 And in the meantime, don't forget to like and subscribe to the Cycling Weekly YouTube
05:33 channel and we'll see you again soon.
05:35 [MUSIC PLAYING]
05:38 (whooshing)