गाजियाबाद के इंजीनियरिंग कॉलेज के छात्रों ने बनाया मार्केट से सस्ता 3डी प्रिंटर, कहा- और सस्ता बनाने की कवायद जारी
कई बार छात्र ऐसे कमाल कर जाते हैं, जिनकी चारों तरफ सराहना की जाती है. ऐसा ही कुछ किया है गाजियाबाद के एक इंजीनियरिंग कॉलेज के छात्रों ने, जिन्होंने कॉलेज प्रोजेक्ट के लिए 3डी प्रिंटर बना डाला, जो बाजार में मिलने वाले 3डी प्रिंटर्स से सस्ता है. आइए जानते हैं इसे लेकर सभी जानकारी..
Category
🗞
NewsTranscript
00:00Thank you very much.
00:30Basically, we have made a 3D printer, which gives us a 3D object.
00:42If I talk about the components, this is our machine control unit.
00:46We have installed three stepper motors here, which control all three directions, X, Y, Z.
00:51To make this, we use ABS material and PLA material, which gives us the object.
00:59Where did you get this idea and how did you get it?
01:02Basically, we can't manufacture an object like machining and finishing.
01:08To make such an object, we can easily make it on a 3D printer.
01:13How much time did it take to make it?
01:15It took us about two months to make it.
01:19Its cost was approximately Rs. 19,000.
01:24How is it designed?
01:26Basically, it works on three methods.
01:29Firstly, we make CAD models on it, like AutoCAD and SolidWorks, where we can make 3D CAD.
01:37After making it, we provide it in layer-by-layer software.
01:44After that, we program it through a memory card.
01:48The machine control unit reads the programming.
01:51After reading it, it constructs and builds up the material through a nozzle.
01:57How many minutes does it take to make it?
01:59It depends on how big the object is.
02:02The bigger the object is, the longer it takes to make it.
02:06How big can it be made?
02:08It can make an object up to approximately 250 mm in height.
02:13What other modifications have you made so far?
02:16Basically, we want to make it as cheap as possible.
02:23This is one modification.
02:25The other modification is that there is a change in the material.
02:29The change in the material has a role of strength and temperature.
02:33We are working on it continuously.
02:36Actually, this is the fourth project in the series of children's projects.
02:42It is highly recommended for children.
02:46They have done a great job.
02:49It can be launched in the market due to its costing.
02:54What kind of project is this?
02:59Normally, a big setup is required to make a 3D object.
03:04Here, children can make small samples from a small setup.
03:09For this, the initial cost will be very low.
03:12When you want to make a 3D object, you can use this project to make a sample.
03:20Sir, the project that you have made, will there be other modifications to make it ready for the market?
03:26Of course.
03:27It will always happen that when students make a project, there is always room for improvement.
03:35Normally, when students make a project, there is always room for improvement.
03:43We will definitely try to involve more students in this project.
03:47We will try to bring more improvement in this project.