✨Regularly inspecting and calibrating the motor of agricultural drone can ensure stable flight and enhance safety. Watch this video to keep your smart drone in the best condition .
Learn more about Agri drone： https://effort-tech.com/en/home
Learn more about Agri drone： https://effort-tech.com/en/home
Category
🛠️
LifestyleTranscript
00:00After the heavy loads and frequency spring flights, the models may possibly be displaced and affecting safety.
00:08Regular inspections and calibrations are necessary.
00:12First, check if the drone is horizontal by placing a level on the flight control module plate.
00:18Ensure the bubble in the level is centered along both the X and Y axes.
00:24If it is not centered, adjust the drone until the bubble is in the middle.
00:30Then, check if each model is horizontal by placing the level on each of the four models, perpendicular to the arms.
00:40Ensure the bubble in the middle.
00:43If not, loosen the screws to adjust the model until the bubble is centered, and then tighten the screws.
00:51Take off the drone and check the throttle values of the four models while hovering.
00:56If the deviation is less than 10%, then it can be used normally.
01:02If the deviation is over 10%, recalibrate according to the above steps.
01:08If this view cannot be leveled, please replace the frame and rickshaft.
01:13We must ensure our models and the level before flight work.
01:17Follow us to get more practical tutorials and updates.