ek Box se char jhalar jalayen | decoration

Khempur Repair
Khempur Repair
  • 2 months ago
title
ek Box se char jhalar jalayen | decoration

about
doston khempur repair channel Mein aapka swagat hai aaj maine aapke liye decoration jhalar ki video Lekar Aaya hun aur is video mein Char wire wali Char decoration jhalar ko ek hi control box se chalakar dikhaya hai ek dibbi se Char jhalar Ke connection kaise karte hain connection karne ke bad jhalar Kaisi Chalti Hai blinking karti hai ya nahin karti hai Kamyab rahti hai ya nahin yah sab aapko is video mein dekhne ko Milega isliye video ko Dekhen Aur Is Tarah Se apne liye ek bahut acchi decoration jhalar banaa len yah video Pasand Aaye To like Karen aur share bhi Karen thank u

Instagram
https://www.instagram.com/khempurrepair/

playlist
Decoration jhalar https://dailymotion.com/playlist/x6n5sw

#khempurrepair
#diwalilight
#decorationlight
#ekBoxsecharjhalarjalayen
Transcript
00:00Hello friends, welcome to the Khampu Repair YouTube channel.
00:04Friends, I was getting a lot of comments regarding the decoration chandelier.
00:08You can see the chandelier that I am showing you today.
00:11All these chandeliers are new and are of different designs.
00:15So, your comment was that,
00:17Sir, please tell us a way to join the four-wire decoration chandelier
00:24so that you put only two wires in power and all the chandeliers burn.
00:28It means that you do not have to cut the plug of all the chandeliers and join them at one place.
00:34You have to give power to only one chandelier and the rest of the chandeliers should glow with it.
00:39So, I have seen a lot of comments like this.
00:41And I am making this video on your comment.
00:44Friends, if you watch this video,
00:46then by watching this video, you can make your bad chandeliers,
00:49the chandeliers that do not have a control box,
00:52you can also make those chandeliers burn.
00:55So, watch this video completely.
00:57If you like this video, then do like this video.
01:00Let's start the video.
01:02See friends, I have that chandelier.
01:05And today I will join all these chandeliers and make one chandelier.
01:10And I will show you by running only two wires.
01:13So, first I will show you by putting it in power that all these chandeliers are right or wrong.
01:20So, the board I have is connected to the series.
01:23It is a series testing board.
01:25First, look at this chandelier.
01:27It is working.
01:29Okay, let's remove it.
01:31After this, I will show you the second chandelier.
01:33Friends, it is possible that the video will be a little big.
01:36I do not say how big it will be.
01:38But you should watch the whole video.
01:42This chandelier is also blinking.
01:44Now I will show you the third chandelier.
01:49That's why I have taken all the chandeliers of different colors.
01:54Okay, this is the third chandelier.
01:56There is no blinking in it.
01:58It is working directly.
02:00Now, let's put this chandelier in it.
02:07And I think this is also a direct one.
02:10See, it is in two colors, white and golden.
02:14You can see it in white and golden.
02:16Okay, see.
02:18If I move the plug, you will know that this bulb is white and this bulb is golden.
02:24I have shown you all four chandeliers.
02:27Before joining it, I will explain the wiring of this chandelier.
02:33This is the control box.
02:35The black box in which the circuit is installed.
02:38This is the control box.
02:40The wires here are AC volt wires.
02:43These two wires are AC volts.
02:47The wires on this side are AC volts.
02:50There will be four wires in total.
02:53As I have shown you in this chandelier.
02:56In the first four wires, there is an LED.
03:02Like this.
03:04There is an LED in the whole chandelier.
03:07In the third wire, there is a direct LED.
03:10In the second wire, there is a direct LED.
03:16In the third wire, there is no direct LED.
03:22As I have shown you in this chandelier.
03:26The wires are like this.
03:28But it is possible that there is a direct LED on the first wire.
03:34And there is no direct LED on the second wire.
03:35And there is no direct LED on the third wire and on the fourth wire.
03:37So this is a different thing.
03:39If you have a four-wire chandelier.
03:41There will be two wires like this.
03:43There will be no direct LED.
03:44There will be two wires like this.
03:45There will be a direct LED.
03:47Now what you have to do.
03:48See.
03:49The wire in which there is no LED.
03:52Okay.
03:53And this is the wire in which there is an LED.
03:55So what will happen at the end?
03:57In every chandelier, this happens.
03:59The wires are first joined together.
04:03The direct wires will be joined first.
04:05After that, the LED wire will also be joined here.
04:09In this wire.
04:10And this wire is also joined here.
04:13So in this way, the connections of the chandelier happen at the end.
04:18Now what we have to do is.
04:20We have to open the wire of this chandelier here.
04:25And the wire without LED has to be taken directly.
04:30That is, the next chandelier has to be connected here.
04:32Without LED and without LED.
04:34And the LED wire has to be connected to the LED wire.
04:38In this way, we have to take all four wires forward by joining them.
04:44Okay.
04:45In this way.
04:46And when your second chandelier will be joined.
04:48Then you join the third wire in the same way.
04:51Then join the fourth wire in the same way.
04:54Now one confusion you will have in this.
04:57If there is a chandelier with three wires instead of four.
05:00Then how to join?
05:02So you have to join it in such a way that there is no LED in your direct wire.
05:08So one of the three wires will be such that there will be no LED on it.
05:11You join that wire with this wire.
05:14Okay.
05:15Join that wire with this wire.
05:16And the LED one.
05:18You join it with the LED wire.
05:20When you go to the very end of the chandelier.
05:23Then you join all the wires together.
05:26So that all the chandeliers start burning.
05:29We will use this box.
05:31I will separate its wire.
05:33Friends, if you can use light.
05:59Then only you check these chandeliers in this way.
06:02Because it is very risky to check with light in this way.
06:05Keep this thing in mind.
06:06If you can't use light.
06:08Then don't try this at all.
06:26You can see that I have separated all the chandelier wires.
06:29And identified the chandelier.
06:31I have put a knot on the wire without LED.
06:35Okay.
06:36In every wire.
06:37So that I know.
06:38Which is the wire without LED.
06:41So in this way I have put a knot in all the wires.
06:44I have also put a knot in this.
06:46Now I will connect this control box with this wire.
06:51And the wire with the knot here.
06:53In which there is no LED.
06:55We will put this wire here.
06:57Which you can see directly in the supply.
07:01Okay.
07:02On this.
07:03And the wire with the LED.
07:05We will put it on these two transistors.
07:07For the output.
07:08These two transistors are given here.
07:10So in this way I put this chandelier.
07:12After that how to connect the chandelier in front of it.
07:15We will talk about that later.
07:25See friends.
07:26I have made a connection.
07:28And the direct print here.
07:30I have put both the wires at the same place without LED.
07:35Okay.
07:36And the wire with the LED.
07:38I have put it on the transistor here.
07:40First I will show you by running it once.
07:43How does it blink?
07:46So here friends.
07:47This is not direct at the moment.
07:50You can see.
07:52You can change its mode as much as you want.
07:55This is in your hand.
07:57You can change it with the help of the controller.
08:00Okay.
08:01So now I will remove it.
08:03Now here your work is this.
08:04Next work.
08:05Remove this chandelier.
08:07And the wire that has come here at the end.
08:11Okay.
08:12So you know what will happen in this.
08:14As I have told you.
08:16All the wires in this will be connected at one place.
08:20So let's see if all the wires in this are connected at one place.
08:25Or not.
08:26See.
08:27You can see this wire.
08:29All the wires are connected at one place.
08:32This wire has LED.
08:34We have these three wires left.
08:36So these three wires.
08:37One of them has LED.
08:40And this LED is in one of these wires.
08:42Because the LEDs are placed by crisscrossing.
08:45So that the focus of the light is good in blinking.
08:49So what we will do.
08:50Let's check the wire from here.
08:52Okay.
08:54So you can check it like this.
08:56You can also find out by touching the wire.
08:58Which is the LED wire in this.
09:01As I have found out here.
09:03This is the LED wire.
09:04So you have to separate this LED wire.
09:07This is the main point now.
09:09You have to separate this LED wire.
09:11And you have to separate this LED wire too.
09:14And these two wires.
09:16You have to join them together and put them in one place.
09:19Now you have these three wires.
09:21Now you can put as many wires as you want in front of it.
09:25So I will do the same now.
09:27LED on LED.
09:29And I will keep connecting these direct wires.
09:32And I will join all the wires in front.
09:34I will not tell you further in the video.
09:36I will just show you by connecting.
09:37Because such a video will be too big.
09:40So I took the green color wire first.
09:42Now we take this black color wire.
09:44Okay.
09:45We connect it like this.
09:46Which looks a little good.
09:51I have joined all four wires.
10:16And I have completed the wire.
10:18Okay.
10:19Now let's power it up and see how it glows.
10:24So I put it on this board.
10:27And it is now on main and not on series.
10:30Because its load will be more.
10:32So it will not glow on series.
10:34Now when I am powering it up.
10:37So I see a problem in it.
10:39You tell me in the comment what problem you are seeing.
10:42I change it when its mode.
10:45So here the mode is changing.
10:48There is no problem in changing the mode.
10:52But there is a problem in it.
10:54Which you may be able to feel.
10:57The problem in this is that the bulb is working properly.
11:00That is, the direction of its bulb is exactly the same.
11:04All four bulbs are blinking the same way.
11:07You can see this.
11:08Are you doing it or not?
11:09That is, it is doing the right thing.
11:11But the problem in this is that its light has reduced.
11:16Because the series of bulbs has increased.
11:19Because of this, the bulb is glowing dimly.
11:22Now what is the solution for this?
11:24You can fix it in this way.
11:26When I have supplied this bulb from this side.
11:29Here is the beginning of the bulb.
11:31I have supplied from here.
11:33So what you have to do is not supply from here.
11:36You have to supply from the middle bulb.
11:38From here you have joined two bulbs on this side and two on this side.
11:42So I will remove it from there and put the control box here.
11:46After that I will show you how it glows.
11:49See friends, now I have connected the bulb in the middle in this way.
11:56Two bulbs have come this way and two bulbs have come this way.
12:00Now you can see that I have put a bulb with four wires in the middle.
12:05And I have put a black bulb on this side.
12:08Now I will put it in power and show you how it glows.
12:17Here I have the main light and I have connected it.
12:22All four bulbs are glowing at the same time.
12:26I turn off the light.
12:28I have turned off the light.
12:30You can see how well it is glowing.
12:32That is, whatever pattern is coming, it is visible in all four bulbs at the same time.
12:38I will change it from the control box.
12:43So here is its step.
12:46I will change it here.
12:49So you can see that all the bulbs are blinking at the same time.
12:53This is what I wanted to tell you.
12:56If you connect it in this way, then all the bulbs will glow at the same time.
13:00Otherwise, half the bulbs will glow at the same time and half the bulbs will glow at the same time.
13:04Or it is possible that all the bulbs will not glow at the same time.
13:08See, I will show you another step.
13:13See this step.
13:16The step of one bulb is now following all four bulbs.
13:21So it looks so good.
13:23I have connected it from the same control box.
13:26If your control box is broken, then you can connect it in this way.
13:35If you do not have a control box, then you can connect it in this way.
13:40This is a very cheap way.
13:44If you have a control box, then you can connect it in this way.
13:47There is only one box and you do not need to connect the main lead.
13:51There is no need to connect the main lead.
13:55All the bulbs are connected in this way.
14:00See, I have connected the bulbs in this way.
14:03There is no need to connect the main lead or wire.
14:08You can connect it in this way.
14:10If you like this video, then please like and share this video.
14:16Subscribe to this channel.
14:19We will meet in the next video.
14:24Thanks for watching.