Ab Kare kharab Sabhi jhalar repair | jhalar light repairing | led rice chain at home
title
Ab Kare kharab Sabhi jhalar repair | jhalar light repairing | led rice chain at home
about
hello doston khempur repair channel Mein aapka swagat Hai Doston aaj main aapko decoration jhalar ko repair karne ka ek Aisa Tarika bataunga Jiski madad se aap apne Sabhi Tarah Ke decoration jhalar ko theek kar sakte hain Chahe aapki jhalar 3 wire wali ho ya FIR 4 wire wali ho ya 5 wire ya FIR 6 wire wali jhalar ho koi bhi jhalar ho aap Har jhalar ko Har Tarah Ki jhalar ko theek kar sakte hain is video Ko Dekhkar isliye video ko pura Dekhen video Pasand Aaye To like Karen aur share bhi Karen Apne doston ke sath thank you
Instagram
https://www.instagram.com/khempurrepair/
playlist
Decoration jhalar https://dailymotion.com/playlist/x6n5sw
#khempurrepair
#diwalilight
#decorationlight
#importantvideo
Ab Kare kharab Sabhi jhalar repair | jhalar light repairing | led rice chain at home
about
hello doston khempur repair channel Mein aapka swagat Hai Doston aaj main aapko decoration jhalar ko repair karne ka ek Aisa Tarika bataunga Jiski madad se aap apne Sabhi Tarah Ke decoration jhalar ko theek kar sakte hain Chahe aapki jhalar 3 wire wali ho ya FIR 4 wire wali ho ya 5 wire ya FIR 6 wire wali jhalar ho koi bhi jhalar ho aap Har jhalar ko Har Tarah Ki jhalar ko theek kar sakte hain is video Ko Dekhkar isliye video ko pura Dekhen video Pasand Aaye To like Karen aur share bhi Karen Apne doston ke sath thank you
https://www.instagram.com/khempurrepair/
playlist
Decoration jhalar https://dailymotion.com/playlist/x6n5sw
#khempurrepair
#diwalilight
#decorationlight
#importantvideo
Category
📚
LearningTranscript
00:00Hello friends, welcome to Khempur Repair YouTube channel.
00:04Friends, I didn't want to make this video today.
00:07But your comments are coming so much that I am making this video for you even if I don't want to.
00:13Today I was going to shoot an amplifier video for you.
00:16But I am making a video of decoration jhalar without shooting it.
00:20Friends, you are getting a lot of comments.
00:23Because it is Deepavali and you have a lot of bad decoration jhalar.
00:28I have made a lot of videos on decoration jhalar.
00:31But today I saw a comment in which you asked how to connect a 5 wire decoration jhalar if its wires break from the box.
00:41Friends, I have told you this question in many videos.
00:48But I have not given a title in any video to repair a 5 wire jhalar.
00:55So you think that there should be a separate video of 5 wire jhalar.
00:59But it is not like that.
01:01If you watch any jhalar video, then you can connect your jhalar in the same way by watching that video.
01:07Whether you have 3 wires, 4 wires, 5 wires, 6 wires in your jhalar.
01:11No matter how many there are, it means that everyone's connections are almost the same.
01:15And that's why I am making this video for you in detail.
01:19Watch this video.
01:20Look, I will try to tell you in a very short time.
01:24First of all, let's understand how the jhalar works.
01:27If you understand this, then you can easily connect your jhalar.
01:33I will draw a line here and show you.
01:36This is one wire.
01:39For now, I will explain to you with a jhalar of about 3 wires.
01:45But after that, you will understand automatically.
01:48So this is the first wire.
01:50There is a straight wire here.
01:52There is no LED in the middle.
01:54Now let's make another wire equal to this.
01:57Now let's put the LED in the middle of this wire.
02:02Something like this.
02:04Now let's make another wire here.
02:06This one.
02:07So what do we do in this too?
02:09Let's put the LED here in the same way.
02:13The LED is placed in such a way that where there is an LED in the upper wire, there is no LED in the lower wire.
02:21And where there is an LED in the lower wire, there is no LED in the upper wire.
02:23The LED is placed by criss-crossing.
02:25Assume that the LED is placed in your jhalar in this way.
02:29Now how will this connection happen?
02:31If we talk about the last one, then all three wires are joined at one place.
02:39And there is a tape here.
02:41In this way, I have told you the last thing about the jhalar.
02:44How are the connections in the beginning?
02:46How are the connections in the box where the jhalar runs?
02:53I am telling you in a very simple way.
02:57Two wires will come from here.
02:59Which will be of your AC volt.
03:04So two wires will be here.
03:06And three wires will be here.
03:10In this way.
03:12Now you see that in your box, this wire can be here and this wire can be here.
03:18It does not mean that.
03:20It means that if you have a three-wire jhalar, then one wire will be there which will go directly inside the box.
03:28As you can see here.
03:30So the main two wires in this are of power.
03:35The wires of power are these two wires.
03:39And the wire that comes directly is this wire.
03:42We call it direct.
03:44And the one with the LED will be here on the transistor.
03:48It will be here on the transistor.
03:52As I show you here.
03:54You see the print and this leg.
03:57So this leg has gone to the transistor.
03:59Similarly, this leg has gone to this transistor.
04:01It means that the one with the LED will go to our transistor.
04:06I told you about the three-wire connection.
04:09Now in your jhalar, there may be four wires.
04:12So the four wires will work in this way.
04:15One wire went directly.
04:17The second one has LED.
04:19The third one also has LED.
04:21The fourth wire may go directly from this side.
04:24And it will go directly to the last.
04:27And this wire will not be here.
04:29It will be here on this wire.
04:31You keep in mind.
04:33It will be on this wire.
04:35This way.
04:36This way this wire will be connected.
04:38Now if there are five wires instead of four in your jhalar.
04:41So in five wires, it is possible that three wires are this one.
04:44Okay.
04:45The plus one.
04:46And the minus one, the LED one, is these two wires.
04:49Or it is possible that your jhalar is instead of double channel.
04:53If it is a four-channel jhalar, then it is possible that there are five wires.
04:56Four wires are of LED.
04:59And one wire in it is like this.
05:02It is of plus, plus volt.
05:04It can also be like this.
05:06If I talk about this box, then the plus in it is here.
05:10In which there is no LED.
05:11And the minus is that which has come from the transistor.
05:14So you will have to see this in your box.
05:17That in your box.
05:19How many wires are there in the LED.
05:22Okay.
05:23The wire with the LED.
05:25You put it on the transistor.
05:27And the wire without LED.
05:29You have to put it here.
05:31Now you can do this.
05:32If you want, you can put both the wires of the LED in one place.
05:35Put it here or put it here.
05:37This will happen that the wires of both your LEDs will run together.
05:41And let me tell you this.
05:42That the wires of your LED will be there.
05:44So in this, the LED will be there.
05:45I will show you by removing one wire.
05:47Then you will understand it well.
05:50Okay, so I will show you.
05:51Look, I have removed this wire.
05:53Now there is an LED here.
05:54Okay.
05:55There is an LED here.
05:56But the second wire of the LED is not here.
05:59It is here.
06:00So you have to take care of this thing.
06:02Open the wire of the LED a little and see.
06:05Okay.
06:06Which wire is the LED?
06:08So whether there are 5 wires in your box or in your shell.
06:12Whether it is 6 wires or 4 wires.
06:14The connection will be like this.
06:15And let me tell you one more thing, friends.
06:18That it is not necessary in your shell.
06:21That this will be the plus wire.
06:23In many boxes, I have seen that there is a minus on this side and a plus on the other side.
06:28So you put this and see.
06:29If your shell does not work, then you must flip the wire.
06:32If you do not flip the wire and put it, then it may be that your shell does not work.
06:37Because I have seen in many shells that there is a minus plus.
06:41And there are many shells that are direct.
06:43Their wire is small and if you put it directly, it works.
06:45So this will be known only after seeing the shell.
06:48That's why you check your shell on the series.
06:52And you connect your shell properly.
06:56As I am telling, okay.
06:57And if you can use the light, then only you connect this thing like this.
07:01This is very risky.
07:02There are AC volts on every print.
07:04There is no primary or secondary section here.
07:06That's why there are AC volts here.
07:08So if you can't do it, then don't do it.
07:10And if the wire breaks from any mechanic, then you can get it installed.
07:15What I mean to say is that you do this work very carefully if you want to do it.
07:19I will show you once by connecting it.
07:21So that you know how to connect.
07:26Connecting...
07:43Look, I have done the connection.
07:46As I said, I have done the connection in the same way.
07:49This is the wire in which there is no LED.
07:52And these two wires are those in which the LED is installed.
07:54And this is the power wire.
07:56Now let's put it on the light and see how it works.
08:01Okay.
08:02So I put it on the series.
08:06And let's see how it glows.
08:10So I have put both the wires here.
08:13And it is glowing well.
08:15There is no problem in it.
08:17So as I have told the connection,
08:19In the same way, you can also connect and fix your shell.
08:23Friends, if you like this video,
08:25Then like and share this video with your friends.
08:28So that more people can fix this shell.
08:31See you in the next video.
08:33Thanks for watching.