THC CONTROL FOR MACH3 PLASMA PROGRAM
Direct USB Connection. (Max 5 M Cable)
Works with USB voltage 5Volt 185ma (do not need an external voltage ) 65db Arc voltage filter, For cur voltage input
CNC program controlled on/off M3/M5 & THC On/off
Auto Antidive protection & Antidive Speed calibration DRO (Set File)
Cur voltage sens Low voltage input 0to10volt or 50 to340v standart Cur voltage
The system will respond to arc voltage changes of less than 340/5 volt.
Regular speed of retract exceeds 200 ipm (5.0 m/norm)Over-voltage protection automatically eliminates "torch diving" during large, out-of-limits
Arc voltage fluctuations; such as kerf crossings or cutting off the edge of a plate
(G28.1) For mach3 plasa Built-in probe touch-retract initial height sensing (IHS) (Set File)
Feature ensure saccurate, repeatable initial piercing height settings...
Plasma system interface module (Set. File For Mach3 Plasma program
Works with USB voltage 5Volt 185ma (do not need an external voltage ) 65db Arc voltage filter, For cur voltage input
CNC program controlled on/off M3/M5 & THC On/off
Auto Antidive protection & Antidive Speed calibration DRO (Set File)
Cur voltage sens Low voltage input 0to10volt or 50 to340v standart Cur voltage
The system will respond to arc voltage changes of less than 340/5 volt.
Regular speed of retract exceeds 200 ipm (5.0 m/norm)Over-voltage protection automatically eliminates "torch diving" during large, out-of-limits
Arc voltage fluctuations; such as kerf crossings or cutting off the edge of a plate
(G28.1) For mach3 plasa Built-in probe touch-retract initial height sensing (IHS) (Set File)
Feature ensure saccurate, repeatable initial piercing height settings...
Plasma system interface module (Set. File For Mach3 Plasma program
Category
🤖
Tech