Storage Solutions for Configuring RAID array and iSCSI targets for performance with ESXi

Open-E
  • 12 years ago
- Configure RAID array and caching with and without BBU
- Create iSCSI target
- Tune the target (SCST) parameters from Open-E DSS V6 Console
- Set the iSCSI initiator IP Adresses in VMware to connect to the Open-E DSS V6 target
- Verify connectivity from the ESXi
© http://www.open-e.com

Recommended

31:02
I
Up next
Data optimization with Open-E JovianDSS De-duplication and Compression
Open-E
46:32
Auto Snapshots and Volume Clones with Open-E JovianDSS
Open-E
43:59
Open-E JovianDSS with HGST 4U60 Storage Enclosure
Open-E
47:11
Disaster Recovery using Open-E JovianDSS Off-Site Data Protection Service (ODPS)
Open-E
50:38
Open E DSS V7 HA Cluster Maintenance Mode part 2
Open-E
47:54
Open E DSS V7 HA Cluster Maintenance Mode
Open-E
13:46
Open-E DSS V7 with Avago Synchro Solution at VMworld 2014
Open-E
52:47
Open-E DSS V7 Active-Active HA-Cluster mit VMware ESXi 5.5
Open-E
43:52
Hyper-V setup and tuning with Open-E DSS V7 iSCSI failover
Open-E
13:46
Tuning iSCSI Target settings for VMware ESX
Open-E
17:04
Add and remove tasks in Active-Passive and Active-Active iSCSI Failover
Open-E
18:26
Send log events from Open-E DSS V7 to a remote log server
Open-E
34:14
What to do when your RAID controller fails in auto failover
Open-E
8:31
Bypass the Software Installer and directly boot Open-E DSS V7
Open-E
55:03
Storage Performance Best Practices Open-E DSS-V7 mit LSI Nytro MegaRAID
Open-E
50:18
Proven SSD Cache advantages with LSI NYTRO MegaRAID
Open-E
15:54
Update your RAID controllers' firmware
Open-E
24:40
Script Control in Open-E DSS V7 mit CLI/API über SSH und PuTTY
Open-E
32:35
Script Control of Open-E DSS V7 with CLI/API via SSH and PuTTY (Plink)
Open-E
21:32
DSS V7 verifying your SPEEDs for your RAID Array and NIC's
Open-E
31:14
LSI RAID as passthrough device for VMware ESX
Open-E
16:57
Open-E DSS V7 with SMB User Audit
Open-E
31:33
Understanding the log file and quick trouble shooting techniques
Open-E
21:09
How to move from Active-Passive to Active-Active mode on Open-E DSS V7
Open-E
29:44
Installing Open-E DSS V7 with two SSDs for a RAID 1
Open-E