Outdoors clean up using a Kubota B2261 Compact Tractor and Front Flail Mower

Outdoors in the Low Countries

This video demonstrates the clean up of stumps and bushes using a Kubota compact tractor with several different implements.  Compact Tractor: Kubota B2261 (4WD, 26 hp, Hydrostatic Transmission) Flail mower: Front PTO Flail Mower type Scorpion from Peruzzo Rhino Ripper: Home made implement with ripping blade for removing stumps Chain Harrow: Implement for flattening fields from Loocon Rake Digger: Home made implement with heavy duty long teeth for digging.  Video by: Outdoors in the Low Countries Music: https://www.purple-planet.com

Transcript

00:00Hi everyone, Sjoerd from MotorWars in the Low Countries.

00:29Now as you can see here behind me there's a lot of grass mowing that I need to do

00:33in order to keep the grass low but of course also it also prevents weeds and bushes and

00:38trees from coming up. But sometimes the branches are getting low and as a result you cannot mow there

00:44and the weed is growing but also the bushes and the trees are growing as well.

00:48So after some time you need to clean it all up and that's exactly what I did here behind me.

00:55I used the chainsaw to cut down the trees and branches and some of the bushes and then used

01:01the Kubota to take out the rest. And that's exactly what you're going to see in this video,

01:05the Kubota together with some implements in order to clean it all up. So in part one you will see

01:12clearing out the bushes with the Rhino Root Ripper, a homemade implement for removing stumps and

01:17bushes, the front driven flail mower to clean out small bushes and some of the weeds and the

01:24chain harrow to make it smooth again and in part two you will see the tilling of these sections,

01:29the sowing of the grass and smoothening of the surface. But we will first start

01:35with the Rhino Ripper on my orange friend, removing the stumps and the bushes.

03:24So

04:24so

04:54uh

05:13uh

05:24so

05:41so

05:54so

06:12and in some cases it's already quite loose with the Rhino Ripper but because of a large tree that's

06:18very near to it it's not able to pull it out even though it's already completely loose.

06:25Then I still need some handwork to finish it.

06:48So

07:07now I cleaned up some of the area here, taking away some of the bushes using the Rhino Ripper.

07:14Now the next step is to flatten it further out using the flail mower at the front.

07:18I still have also the vertical blades underneath. I didn't remove them because I like to also

07:25sometimes sweep the grass a little bit with it. So I'm going to use it now to flatten it out further

07:32so new grass can be sown in. So let's start.

08:43So

09:13so

09:43so

10:13so

10:43so

11:13so

11:43so

12:13so

12:43so

13:13so the stems have been taken out with the Rhino Ripper. The rest of the bush has been mowed down

13:23using the front flail mower and now the rest I will try to flatten out further using the chain

13:29harrow and when it's flat enough then we're good to go. So still some flattening out for me to do.

13:37I hope you enjoyed the video. Thanks for watching and see you next time.

Category

Transcript

Recommended