#240 IPM intelligent  Power module Desoldering and soldering - video Dailymotion

Babar Electronics HVACR

Watch our videos on this channel to learn the most advanced and skillful ways of diagnosing and repairing many types of Printed Circuit Boards (PCB). We use many types of advance tools to troubleshoot and fixing the problem. We also provide videos on Industrial, Commercial & Domestic Refrigeration Systems and Air Conditioning. Please Subscribe to our channel to stay updated and to keep learning. Thank you for Visiting our channel. Please don't forget to Subscribe, Share and like :) if you have any questions, please feel free to contact on +92 333 8921850  #code repair # inverter ac PCB course  #review for ac repairing course #ACPCBrepairingcourse #AC PCB training institute #ACPCBrepairing  #ac PCB repairing course in Pakistan  #ac PCB repair #Repair ac #PCB #repair ac PCB repairing  #BestACPCB repairing  #ACrepairing course# best ac PCB repairing # inverter ac PCB repair and voltage study # ac PCB board repair # How to repair inverter ac PCB board # ac PCB repair Kaise kara# inverter ac PCB online course # inverter ac PCB repairing institute # inverter ac indoor PCB wiring # Haier washing machine PCB repair # online inverter repairing course# circuit repair training # inverter operation in power electronics #Basic electronics channel #inverter fridge PCB repair #washingmachinePCBrepaircourse# inverter circuit board #ac repairing training center #AC Godraj inverter AC #Ustad #Babar #BabarPCB #Babarelectronics  #Haier inverter ac New model inverter PCB#DC inverter Haier outdoor PCB #Haier inverter ac old model inverter PCB#  Haier indoor PCB # E1# E2# E3# E4# E5# E6# E7# E8# E9# EE# EH# F1# F2# F3# F4# F5# F6 #F7 #F8 #F9 #FO #FU #PO #P1 #P4 #P7#PH #H5 #OB #U8 #EE #EH #F1 #F21 #F24 #F25 #F28 #H5 #Samsung #E121 #E122 #E468 #E485 #Panasonicerror #H15 #H27 #H30 #Dawlance #C4 #mamunkanjan #electronics #inverter Washing machine PCB repair #Washing machine PCB Diagram #Gree Dc Dawlance PEL Orient Dc inverter ac P4 error code outdoor pcb Dc inverter ac PCB PEL #Dawlance Orient Kenwood  #Changhong PEL Orient# Dawlance Kenwood Haier Dc inverter ac E7 error code outdoor pcb TCL  DC inverter ac EE P4 P6 P8 error code Gree Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Changhong  Ruba  Dc inverter ac E5 error code VRF PCB repairing center Babar ElectronicsDawlance Dc inverter ac F1 error code outdoor pcb Dc inverter ac error code repair Sir BabarChanghong Ruba Dc inverter ac J5 error code Electrolux Dc inverter ac  J5 error code outdoor  pcb Dawlance Dc inverter ac P4 error code outdoor pcb Dc inverter ac service center sir Babar Kenwood Dc inverter ac FO  error code outdoor pcb  inverter ac pcb teacher Sir BabarHaier Dc inverter ac 1 ton /1.5 ton /2 ton  PCB connection  VRV / VRF PCB repairing center Sir BabarHaier Dc inverter ac  compressor off in one minute No error  IPM kya hai  IPM Testing Sir Babar Gree DC inverter ac outdoor pcb E8 error code and indoor pcb Orient Dc inverter ac outdoor pcb P4 error

Transcript

00:00As-Salaam-Alaikum

00:02This is not a repair kit

00:04Ok

00:06This kit is damaged

00:08But it's IPM is good

00:10But we will remove it

00:12That's why we have to keep it

00:14But we have to remove it

00:16And we have to put it back

00:18Come

00:20He is sitting with me

00:22He has also come here for training

00:24Where are you from?

00:26I am from Balochistan

00:28I will show you how to remove it

00:30How to remove IPM

00:32And how to dissolve it

00:34And how to re-solve it

00:36You do like this

00:38Turn on the dissolving gun

00:40And hold me

00:42Ok

00:44Hold it

00:46Ok

00:48This is the dissolving gun

00:50This is the way to use it

00:52First we will remove the high side

00:54This is the pen free

00:56This is the way

00:58Speed

01:00Ok

01:02This is the pen free

01:04This is the pen free

01:06Now we will remove the low side

01:08Ok

01:20This is the pen free

01:22Show them

01:24This is the way

01:26This is the way

01:28All the pen are free

01:30All the pen are free

01:32Now turn off the dissolving gun

01:34Turn it off

01:36Turn it off

01:38Turn it off

01:40Turn it off

01:42Turn it off

01:44Turn it off

01:46Now we have

01:48Now we have

01:50Dissolved

01:52Now, one big advantage of this is that it does not allow heat to be generated.

01:57Now, we have to hold it like this.

02:01Hold it like this and look at it very carefully.

02:03Because there is a little bit of it.

02:05In fact, it is not there.

02:06Look at it.

02:07It has opened.

02:09Look at it.

02:10The old one that we had put.

02:11Look at it.

02:12It came out.

02:13Look at it.

02:14It is fine.

02:15But look at it.

02:16It is absolutely clean.

02:17It is 100%.

02:18Now, look at it.

02:19The pin here is also clean.

02:21And look at it.

02:22It is 100% clean.

02:24There is a lot of damage to the kit.

02:26But we have used it only to remove it.

02:29So that they know how to remove it.

02:31And now, we will do the re-soldering of it.

02:35We will put it inside the pin.

02:38Look at it.

02:40Look at it.

02:41It has been re-soldered very easily.

02:44There is no problem.

02:45Look at it.

02:46We have put it.

02:47Now, we will do it.

02:48This is the method of putting it.

02:51Sometimes, it comes out from the top.

02:55There is no screw in it.

03:00Now, I am putting it.

03:02It is fine.

03:03Here.

03:05Now, we are putting the paste on it.

03:08Look at it.

03:09I am doing it for you.

03:11Look at it.

03:12Can you see it?

03:13Yes.

03:14Look at it.

03:15You have to take this paste.

03:17Use this paste.

03:18It does not make carbon.

03:19Look at it.

03:20We apply it little by little.

03:23Look at it.

03:24With this, you can do the soldering very easily.

03:32I have done it.

03:33Keep it closed.

03:34Do not keep it open.

03:35Look at it.

03:36Now, you close the light.

03:40I will give you the view in front.

03:42Close all the lights first.

03:44Close this one as well.

03:52Now, we are doing this.

03:54We are doing the re-soldering.

03:56We are applying it again.

03:57Look at it.

03:58We have removed the IPM and applied it.

04:00We have not closed this video for a long time.

04:03We are working on the on camera.

04:05Look at it.

04:06You can see it.

04:07Look at it.

04:13I am applying the Kavyavi Solder Iron in a big size.

04:19I have not applied it in a small size.

04:21It will take some time to apply it in a small size.

04:24We will heat it again.

04:27I have decided to apply it in a big size.

04:29There is no problem.

04:30Can you see it?

04:32Yes.

04:33You have to apply it like this.

04:35If you want to work with it, do it like this.

04:41Look at it.

04:43Now, we have completed one side.

04:48We have completed one side.

04:50Look at it.

04:51We have completed the re-soldering.

04:53We have completed it.

04:55Now, we will apply it on the other side.

04:57Look at the other side.

04:59We have completed it.

05:01You can check it.

05:03It is applied very cleanly.

05:05Now, we will apply the UVW on the other side.

05:07First, we will apply the non-connected pin.

05:11After that, we will apply the UVW pins.

05:14I will show you how to apply it.

05:17Look at it.

05:18I have heated the Solder Iron.

05:22I have applied it like this.

05:24You have to make an effort to work with it.

05:27You have to work with cleanliness and efficiency.

05:30You have to check whether your work is genuine or not.

05:36You have to work with it properly.

05:42Look at it.

05:44We have completed the re-soldering.

05:48Look at it.

05:50You can check it on the Kavya.

05:52You have to work with cleanliness.

05:55The more you work with cleanliness, the better it will be.

05:59Look at it.

06:01The carbon has been removed from it.

06:04Now, it is dry soldering.

06:06It is not supposed to be dry soldering.

06:08Now, it is not supposed to be dry soldering.

06:11All the pins have been soldered.

06:14We have applied the UVW and soldered it completely.

06:18Now, we will apply the break.

06:21We will apply the break of the camera.

06:23Look at it.

06:25I have soldered it completely.

06:29Now, I have shown you how to remove it.

06:32Now, I have shown you how to apply it completely.

06:36Look at it.

06:38It will not be judged whether it is genuine or re-soldered.

06:42I have told you that the kit is not good.

06:44It is dead.

06:46Still, we have covered it in such a way that it will not be judged.

06:50If any brother wants to do training, he can do it.

06:54If anyone wants to learn any work, he can learn it.

06:58There is no problem.

06:59You can come and learn the work.

07:01If you like the video, please like and share it.

07:05Peace.

#240 IPM intelligent Power module Desoldering and soldering

Category

Transcript

Recommended