Category
🦄
CreativityTranscript
00:00 Divide the hair as shown, two triangles on each side of the head with an oblong shaped section through the top.
00:07 Start the haircut through the centre back, take a vertical section and lift it up to allow the hairline to drop away and cut a steep angle from short to long.
00:27 Notice how the sections pivot around the back of the head. Keep over directing back to produce a concave result.
00:35 Through the sides take horizontal sections and over direct the hair strongly back.
00:41 On the final sections allow the hair to slide through the fingers to produce exaggerated length through the front.
00:48 Now repeat this technique on the second side.
00:56 Here you can clearly see the angle being achieved.
00:59 Now move onto the outline.
01:24 Cut a curved line using a degree of tension to produce a graduated result.
01:30 Using a pointing technique allows the line to be more exaggerated.
01:40 For greater control hold the outer corners in the fingers and allow the hair to slide through while using the tips of the scissors.
02:05 Refine the sections by pointing throughout. This must be carried out when the hair is dry.
02:11 Now cut the outline.
02:13 Use a pointy tool to cut the outline.
02:16 Now cut the outline.
02:18 Now cut the outline.
02:47 Now cut the sides.
02:49 Gently point a line from the temple to a point above the ear.
02:54 Be extremely careful to retain the hairline length.
03:06 Hold the hair in the comb for minimal tension.
03:12 Cut sections into the back and continue cutting in a curved line.
03:17 Draw subsequent sections down onto the line to build the shape.
03:30 Towards the back allow the hair to slide through the comb.
03:56 Finish by holding the hair in the fingers and dust the line.
04:00 Once again allow the hair to slide through the fingers to exaggerate the length.
04:09 Now repeat this procedure on the second side allowing for any growth patterns that differ from the first.
04:24 Repeat on the other side.
04:26 Now cut the outline.
04:28 Use a pointy tool to cut the outline.
04:31 Hold the hair in the comb for minimal tension.
04:35 Cut the outline.
04:38 Now cut the outline.
04:41 Use a pointy tool to cut the outline.
04:44 Hold the hair in the comb for minimal tension.
04:47 Cut the outline.
04:50 Now cut the outline.
04:54 Use a pointy tool to cut the outline.
04:56 Hold the hair in the comb for minimal tension.
04:59 Cut the outline.
05:02 Now cut the outline.
05:05 After finishing the second side, dry the hair and refine the whole area.
05:11 Dry the top hair lengths and cut an asymmetric angle.
05:16 Fans of the creative team will recognize this technique from the bias cut.
05:21 Over direct the sections back to leave greater length through the front.
05:26 Now refine this length by pointing through the sides.
05:37 Now cut the hair.
05:39 Use a pointy tool to cut the hair.
05:42 Hold the hair in the comb for minimal tension.
05:45 Cut the hair.
05:48 Now cut the hair.
05:51 Use a pointy tool to cut the hair.
05:54 Hold the hair in the comb for minimal tension.
05:57 Cut the hair.
06:00 Now cut the hair.
06:04 Make sure the crown sections are blended through the back.
06:07 Finish by slicing the hair to reduce the bulk.
06:11 To recreate Johannes Itten's colour wheel, the hair is sectioned into triangles.
06:16 The finished result, clever colouring, superb cutting, pure Sassoon.
06:21 The hair is sectioned into triangles.
06:23 The finished result, clever colouring, superb cutting, pure Sassoon.
06:28 See you real soon.