Uttarkashi Tunnel Rescue Updates:क्या है US से आई Auger Machine?कैसे बाहर आएंगे 41 मजदूर?GoodReturns
Chardham Yatra मार्ग पर बन रही Silkyara Tunnel का एक हिस्सा 12 नवंबर को ढह गया था और उसमें काम कर रहे 41 श्रमिक मलबे के दूसरी ओर फंस गए थे। तब से विभिन्न एजेंसियां उन्हें बाहर निकालने के लिए युद्धस्तर पर Rescue Operation चला रही हैं। इन 41 मजदूरों के बाहर निकलने का इंतजार पूरा देश कर रहा है, लेकिन बचाव अभियान में आ रही एक के बाद दूसरी मुश्किलों से सभी की सांसें अटकी हुई हैं। कभी लोहे का जाल, तो कभी सरिया और गर्डर तो कभी पत्थर निकासी टनल के काम में बाधा बन रहे हैं। बुधवार से लेकर शुक्रवार शाम तक ड्रिलिंग का काम बाधाओं में अटका रहा. चलिए जानते हैं Auger Machine के बारे में जिसकी मदद से मजदूरों को बाहर निकाला जा सकता है.
#Uttarkashitunnel #augermachine #tunnelcollapse #uttrakhand #uttrakhandtunnelrescue
~PR.147~ED.148~GR.124~HT.96~
#Uttarkashitunnel #augermachine #tunnelcollapse #uttrakhand #uttrakhandtunnelrescue
~PR.147~ED.148~GR.124~HT.96~
Transcript
00:00 A part of the Silkyara tunnel on the Char Dham Yatra road was damaged on November 12 and
00:10 41 workers working in it were trapped on the other side of the Malpe.
00:14 Since then, different agencies have been conducting rescue operations at the war level to get
00:19 them out.
00:20 The entire country is waiting for these 41 workers to come out.
00:24 But everyone is suffocating with the coming one after another difficulties in the rescue
00:28 campaign.
00:29 Sometimes iron nets, sometimes ropes and girders, sometimes stone-pulling tunnels are obstructing
00:33 work.
00:34 From Wednesday to Friday evening, drilling work was obstructed.
00:37 The pictures of the tunnel rescue campaign in Uttarkashi, you must be seeing through
00:42 TV, newspapers or digital media.
00:44 In that, you must be seeing a heavy auger drilling machine that is digging this tunnel.
00:49 The auger machine used in the Silkyara tunnel claims to drill up to 50 meters at a time.
00:55 The tunnel is made to reach the workers and rescue them.
01:00 It is more than 30 meters.
01:02 Let me tell you what auger machines are and how to use them from small to large.
01:09 In Hindi, these auger machines are also called Burma machines, whose main task is to drill
01:15 holes in the ground.
01:16 So what are the details of this, they will tell.
01:19 The auger drilling machine that is working in the Silkyara tunnel is an American auger
01:25 machine, which was airlifted from Delhi to Dehradun in three air force aircrafts and
01:31 was transported here from there by road.
01:34 This machine can drill the tunnel in 5 meters per hour, that is, it will dig up to 50 meters
01:41 in 10 hours.
01:42 The drilling machine was very slow and technical problems were also there.
01:46 This auger machine is called engineering horizontal auger drilling machine.
01:50 This machine does not only dig holes in the rocks and the ground, but also makes other
01:55 holes in it and its rotating blade also pulls the ground out of it.
02:00 It is called Burma.
02:01 Horizontal auger drilling machine is a road header that can dig a horizontal tunnel in
02:06 the soil and rocks.
02:07 It can also dig a road in the soil while moving forward.
02:10 It uses a rotating shaft to remove the soil while moving forward and removes the soil
02:16 that has been dug by the Burma spiral edge.
02:19 If you talk about the latest update, then the American auger machine has drilled 47 meters
02:24 so far, and about 15 meters of digging is still left.
02:27 Iron objects are coming in front of the machine again and again, which is making the work
02:31 very much.
02:32 After Friday afternoon, the drilling machine is still working.
02:35 In this, the wait to remove the workers is getting longer and longer.
02:40 The same update has been coming out for two days that the workers will be out in a few
02:45 hours, but the technical problems are continuing, due to which the wait is increasing.
02:50 The rescue operation team is now preparing for vertical drilling in the tunnel.
02:54 The team has reached the hill above the Silkyara tunnel.
02:57 The border road organization has also started the work.
03:00 The horizontal drilling was going on in the tunnel, but as I told you again and again,
03:05 there are problems in the machine, it is stuck in the net, so it has to be done behind.
03:10 The final decision on vertical drilling will be taken by the Satlaj Jal Vidyut Nigam and
03:15 the Oil and Natural Gas Cooperation Authority.
03:17 The initial plan for drilling is to remove the workers from the tunnel and remove the
03:21 workers from the tunnel.
03:22 The workers will be removed from the tunnel and the tunnel will be removed from the tunnel
03:27 and the tunnel will be removed from the tunnel.
03:30 The team of the engineers has reached the hill for drilling and as soon as they get the
03:34 green flag, they will start the work of vertical drilling instead of horizontal.
03:37 First of all, the platforms of the auger machine, which were weakened on Thursday night, were
03:41 repaired.
03:42 On Friday, the drilling work started, so steel pipes came in the way of the auger machine,
03:45 due to which the pipe turned.
03:47 The part of the pipe that is being put in the steel pipe and tunnel has been removed.
03:51 The auger machine was also damaged, which was repaired.
03:54 On Friday, the whole day the technician was busy making the way for the tunnel.
03:58 So now it will be seen that the whole country is waiting that whoever is stuck in this tunnel
04:03 from November 12, 1941, how will they be removed?
04:06 Other ways are also being adopted, due to which this work can be done soon.
04:10 What do you think?
04:11 Do tell by commenting.
04:12 If you are watching the video on Facebook, then like the Facebook page.
04:15 If you are watching on YouTube, then do not forget to subscribe to the YouTube channel of
04:19 Goodrotters.
04:20 and subscribe to the YouTube channel of Golder Tons.
04:23 (upbeat music)