புனேவில் உள்ள "டார்க் மோட்டார்" நிறுவனத்தின் தயாரிப்பு ஆலையில் எப்படி எலெக்ட்ரிக் பைக்குகள் தயாராகிறது என்பதை இந்த வீடியோவில் கோஸ்டி உங்களுக்காக தெளிவாக விளக்குகிளார். முழு தகவல்களை இந்த வீடியோவில் காணுங்கள்!
#TorkMotors #ElectricVehicles #Walkaround #MakeInIndia #DriveSparkTamil
~PR.156~
#TorkMotors #ElectricVehicles #Walkaround #MakeInIndia #DriveSparkTamil
~PR.156~
Category
🚗
MotorTranscript
00:00 Welcome to DriveSpark, my name is Vedant Johari and today we are in Pune at the Torque Motors
00:10 factory where we have the assembly line and all the production motorcycles over here.
00:16 So let's take a look at their assembly line up close and how they produce each motorcycle
00:21 of theirs.
00:22 So here we are at the assembly line and they have many stations over here.
00:27 Starting off we have the station where they put the battery together, the three parts
00:31 of the battery and here is the chassis.
00:34 Now the first stage of the assembly is where they fit the chassis on top of the battery
00:39 properly and mount it together and following this we have the station where the rear subframe
00:46 is added, rear suspension, front suspension and the front mudguards.
00:51 Now after this we have a pretty important station, here is where our tyres are fit,
00:59 our sprockets are put on, our brake calipers at the front and the rear and now moving on
01:05 from this we have the proper assembly line and on this side we can see the final product
01:12 of the chain actually fit onto the motorcycle.
01:15 Now moving on we come to this station, this station is where the cover for the rear mudguard
01:24 is added, our rear subframe, our instrument cluster, handles, basic wiring, our charging
01:31 port and the rear LEDs.
01:34 After this section we can see that the bike is slowly coming into place.
01:38 Over here our rear panels are added, some more of the wiring is done, actually most
01:42 of the wiring is done in this stage.
01:44 So here we have the station where our hood pegs are added for the rider and the pillion,
01:51 the main wiring is done here, the aux battery is put in and also the LEDs are finally properly
01:58 added on this section and the handle is properly connected onto the motorcycle over here.
02:03 Now moving on from this section we come to the second last stage of the assembly line
02:09 where most of the bike is in order.
02:12 Here the only difference is the rear body panels are added, the chassis cover is added,
02:18 also the shrouds are added over here and the belly panel is also added in this section.
02:25 Now finally in the part of our assembly line we have almost the final product of the Kratos
02:31 R and here is where all the final body parts are added, especially the tank and the utility
02:38 box is added over here.
02:40 Now once we're done with this section of the motorcycle we come to this section, here
02:45 is the final product of the Kratos R but one step before we actually see the final product
02:51 is where the tuning of this motorcycle happens.
02:55 As we know it's an electric motorcycle so it checks all the sensors, it checks the wiring,
02:59 everything just to make sure that the bike is in proper running condition and can actually
03:03 be put out for the public.
03:05 So this was the assembly line of the Torque Motors factory.
03:09 Now beyond this we do have some more stuff such as the vehicle height inspection booth.
03:14 This is just where they check the LEDs of the motorcycle, so the brake lights, the indicators,
03:22 the front headlamp, the front indicators and that.
03:25 Then as you can see ahead we have one more station, now this is the dyno, here is where
03:31 they check the performance of the motorcycle where they have to run it through various
03:35 tests to see how compatible the bike is with city going conditions and that.
03:40 So now after the dyno we come here to charge the motorcycles, charge it to 100% and then
03:46 the bikes are then taken out for a spin around the facility wherever they can to see how
03:52 the bike actually runs, how it's performing, if it's actually living up to how it should
03:58 live up to actually be a production motorcycle.
04:00 If any faults are found they'll bring it back here, work on the motorcycle and repeat the
04:04 cycle again.
04:05 Now after all this is done we finally come to our production line of bikes.
04:09 Here is where we have the final product of the Kratos R motorcycle and these are ready
04:15 to go out to the public to ride.
04:18 So this was the Torque Motors factory, the walk around of the factory, so let us know
04:24 down in the comments section below what you think of the Torque Motors Kratos R and of
04:29 the Torque Motors factory.
04:30 This is Vedant Johari signing off.
04:32 [Music]