Four Horsemen Cosmic Legions Gravenight Slygor Ryz T.U.5.C.C. Gravekeeper Figure
Category
😹
FunTranscript
00:00The last place a lifer will want to find himself is in the lower ring.
00:05Here's a look at the Four Horsemen, the Cosmic Legion, Sligar Riz, the Tusk Gravekeeper.
00:30Although much of the prisoner's sentence at Valkatar spent steering clear of the throngs
00:48of Splexian prison guards patrolling every corner, it is though the guards of Block Five
00:52that need to be avoided at all costs.
00:54These Tusk Block Five attendants, commonly referred to as Gravekeepers, are tasked with
00:57watching over and disciplining the inmates unlucky enough to find themselves in the dreaded
01:01lower ring of Valkatar prison.
01:02They're led by the brutal commander, Sligar Riz.
01:05Stern and unyielding, Sligar Riz is not to be crossed.
01:08A former champion of the prison's fighting pit, the Ithakrian thug takes a no-mercy approach
01:13with his inmates.
01:14As a survivor of the ring himself, Sligar believes that the only approach of any worth
01:18when dealing with the weaker and less successful combatants is one of harsh discipline and
01:22zero tolerance for failure.
01:25If Valkatar was a place of mercy, then the mercy's name would be Sligar Riz.
01:29Just before we get a closer look though at the Sligar Riz from the Cosmic Legion's
01:32line, I'd like to thank the folks over at Four Horsemen that were kind enough to provide
01:36this sample we could have a look at.
01:38The figure is part of the modular line.
01:40In other words, you can mix and match the parts with other Cosmic Legion figures.
01:43We're going to start things though first with Sligar Riz, and we're going to start
01:45things first with the tape measure.
01:47The tape measure is going to tell us that based on the configuration he is right now,
01:50Sligar Riz is going to stand at six and a half inches in height, or the figure is going
01:55to be about sixteen and a half centimeters tall.
01:57Now, I am fairly new to the Cosmic Legion's line, but I'm not new to the work that the
02:01Four Horsemen have been doing over the years.
02:03We're going to slide over though Riz, and we're going to bring in one that they have
02:06worked on in the past, that being the Master Universe classic, Skeletor.
02:10Funny though that they are from different lines, funny that they're from different
02:13universes, and yet though, Sligar Riz is about the same size as Snake Mountain's master Skeletor.
02:20For the sprawling amount of accessories that come packed along with Sligar, there's a
02:23fair bit of territory to cover.
02:25Again, the sell of this line is that it's modular, so you can change not only the parts
02:29that come included with actually the figure of Sligar, but if you have been collecting
02:32as well the also Cosmic Legion figures, you can also mix and match the parts that come
02:36included with those figures as well.
02:38We're going to start things though first with I suppose the simplest of things, that being
02:41his hands.
02:42As he has right now, he does have gripping hands.
02:44That's not a hundred percent true.
02:45He has a gripping hand on one side, he has a trigger finger hand on the other, but he
02:48does also come included with closed fists.
02:51With all the things that he comes abundance-wise with accessories, I don't think I've ever
02:54seen myself ever displaying the figure though with closed fists.
02:57The fists though for what they are, nicely painted, they've done a nice job in fact
03:01of using this metallic blue finish that will be a common trend of course when we look at
03:04the figure.
03:05The other thing that he also comes included with is a grabbing hand, a slightly more closed
03:10gripped hand, and he also comes with a slight couple variations also of trigger firing hands.
03:14It is though to note that if you look at the hands themselves, one actually has a pivot
03:18point of the hinge going this way back and forth, while the opposite one actually has
03:22it hinging forward and back.
03:24So there's a couple of different ways that you can have those fists changed out.
03:27The hands themselves are going to hold of course the many multitude of accessories that
03:31the figure comes with.
03:32First of all, he gets himself a rifle.
03:34The rifle appears to be cast all in dark, kind of a gunmetal gray.
03:38There's some nice additional accents they've added there as well in a lighter gray.
03:41And on the side, you can notice there as well that there's a little hole.
03:45Now with all the things that he has, all the different ways that you can change and
03:49mix and match the parts, like for example, he has a couple of hoses.
03:53The hose, what you could do is you can attach the hose onto the side.
03:57Now again, this hose isn't just going to be simply used though for the rifle, oh no.
04:01What you can also do too with the hose, so if you say for example wanted to have this
04:04in his hand, let's just put this in his hand right now, take the handle, obviously we all
04:09know how this fits into the figure's hands, we're going to slide that in place like that.
04:12And then what you could do is that you can take the hose and he has a hole basically
04:16right there.
04:17So right away, you can attach it there.
04:19You could also too, if you flip around the back of the figure, he has connecting holes
04:23on the back of his belt.
04:24He also has it on the back of his torso too.
04:27So again, you can take those parts and you can just attach them anywhere that you want.
04:31So you can plug it in on the back, for example, right there.
04:33You can, again, as we're changing out the parts, you'll see what I mean, you'll see
04:36what I mean.
04:37So there's already that as an option.
04:39What you can do also too, is if we put the figure down here for a second, the figure
04:43comes also included with these little clear posts.
04:47Hopefully you guys can see, I know they're somewhat transparent.
04:50These also they'll plug into that same hole, and then you can also take that and you can
04:55plug it onto his arm.
04:56Not that that's a place where you're probably going to be keeping an extra firearm, but
04:59the idea again in mind is that you can also flip around the figure.
05:02Remember those holes we looked at earlier?
05:04You can plug it onto the back of his belt.
05:05You can plug it also as well on the back of his torso.
05:08Those are in quarters though, if you want to plug it onto the back, but the means are
05:11still available there as well.
05:13He also comes included, let's just take this off and put it off to the side here.
05:17He comes also included with a staff that serves as well as a cattle prod.
05:20The staff on its own is molded here, I'm guessing in dark black plastic.
05:24Then they've painted the bands all individually here in dark gunmetal gray, some nice additional
05:27blue there as well.
05:28And then on the end, you can see that it's not doing much of anything right now until
05:32we add these parts.
05:34Now there's two configurations for the cattle prod.
05:36If you want to look to shock somebody, well, you're probably going to be using this piece
05:38right here, but they seem to be somewhat identical other than the fact that as you can see probably
05:43in this one, if I run it, especially my hand, oh, that's a lot easier to see.
05:47You can see there's sort of electricity running in between the two prongs and then they stick
05:51out the end here.
05:52Psst, don't want to get too close.
05:53I'm going to shock myself.
05:54You can see that there's a little stream of electricity on the top.
05:58Now again, if you want to use this one, this would just basically plug onto the end of
06:01the staff like that and you would be carrying around that with him.
06:03There doesn't seem to be any connecting hole here.
06:06So if you wanted to plug onto the back of his body, for example, there doesn't seem
06:09to be a means.
06:10And again, if you wanted to, you just take that off, you then swap it out with the one
06:13that he wants to use.
06:14If he wants to be shocking the prisoners, don't get too close, don't get too close,
06:18whatever you do.
06:19And that looks really nice.
06:21Still though, I wish that they had included like a clip, for example, that could have
06:24accommodated this.
06:26Of all the things that he has, and he has a lot of things, there doesn't seem to be though
06:29a clip to accommodate attaching this onto the back of his body.
06:32Move that off to the side.
06:33The figure also comes included with a shield, kind of just kind of looking at the lay of
06:37the land and seeing what exactly I should be looking at next.
06:40Comes included with a fairly simple looking shield and simple, I don't mean to really
06:44diminish this, it's a really nicely painted shield.
06:47You can see even they've painted the trim, painted the little individual rivets, and
06:51this would attach onto his place on his body in several different ways.
06:55You get these extra pieces here, and I want to make sure I've got all the extra pieces
06:58here with me.
07:00You get these little ring pieces, and they look to be very similar in size, similar in
07:04shape, and similar in color.
07:06It's not though until you look at the back of them.
07:08One has though a noticeably smaller peg than this one here.
07:12If you wanted to, so again like this basically, you just take the back of the shield and you're
07:16going to fit this through from the back, slide it in place like that, and then he comes with
07:21a handle.
07:22So the handle attaches onto using the smaller peg, just plugs in, you just kind of have
07:27to twist it back and forth a little bit, and now you can actually use it as a hand
07:30shield.
07:33While we're still using though this configuration, he comes with a couple of effect pieces.
07:37So he has what I would imagine to be kind of a force field effect, and the way they've
07:41attached it, if you look at the back of it, kind of looks like a keyhole.
07:43So there's a circle, there's a little lip, the lip and the hole are very important when
07:48it comes to attaching it.
07:49You have to attach it one way, and that plugs onto the front of the shield this way.
07:52You could also take this off, and he comes with a much more elaborate shield.
07:57So the whole idea again of component pieces mixing and matching the parts to get the desired
08:00look that you want.
08:01If you wanted to, you could have the gravekeepers, like if you had multiple of these for example,
08:06kind of strip down the armor that we will do more in a moment, and then if you wanted
08:09to have like the gravekeepers sort of giving more of a generic shield, you could do that.
08:13And then if you wanted to have then Sligor displayed with a more elaborate shield, this
08:16again plugs in place, and I think this is the Tusk logo there featured on the front,
08:21and just a nice way to kind of customize exactly the way that you want to have the gravekeepers
08:25displayed on your shelf.
08:27While we're actually, you know what, while we've got that in place, actually no, we have
08:31to take this off first.
08:32So we're going to remove this.
08:33This is just going to pop back through, simple as that, and then we're going to take the
08:36longer peg.
08:37So it's a much longer, much bigger, bulkier kind of peg there, and that's going to plug
08:41in basically the exact same way.
08:43Fits through the back, go back and use the shield piece that we want to use, that fits
08:48in place like that.
08:50And now, because that's also using that same universally sized hole as basically all the
08:54things we've looked at so far, this can now attach onto his arm, and he has a hole on
08:58this side, he has a hole on this side, so you can decide where you want to exactly have
09:02that attached.
09:03You can attach the shield onto his arm, for example, or you can also flip the figure around
09:07to the back.
09:08You can plug it onto the back of his belt.
09:10I know that's not normally a place where people keep their shields, or you can also attach
09:13it onto the back of these holes too.
09:15Although with the quarters, again, they're pretty close, you just barely can get them
09:19on there.
09:20It's not really working well with the sort of canopy that he has right now, but as we
09:23kind of, again, remove the parts, this would then be able to plug onto those back of the
09:27holes.
09:28See what I really mean when I'm talking about the configuration of this figure.
09:31The other thing that he also has as well, is he has this black piece too.
09:35And if you look at the back, this will also serve as a place to attach the additional
09:38multiple armors.
09:39This actually plugs onto the back, so there's a slot plastic right there, you already know
09:44where this is going.
09:45That's going to plug onto the back like this, there we go.
09:49And then what you can do, is now you've got some additional hoses here that then can,
09:53if you want to attach the hose this way, feed it from like the front, or feed it from right
09:57here, you can also attach it onto the back, so you can do that as well.
09:59You can also attach the gun, you know, again, if you want to have the hose from the back
10:04of the body to the gun, you can also do that as well.
10:06But I think this also serves as well, yeah.
10:08So if you put the figure down here for a second, go back to the configuration that we had before,
10:13again you can see what I mean here.
10:14We're just going to remove this piece here, pop this off, pop that back through.
10:20I probably should have maybe started this when I was using this piece here.
10:22So this is the smaller peg, right?
10:24That's going to fit onto the back of the figures, or the back of the shield.
10:27And then you can take the handle piece, which again kind of looks a little bit like a hose,
10:32attach that onto the back, and again you can either have them holding it right as a shield,
10:36but if you also too, if you look at the back of this, this slots onto the back in that
10:40hole, so there's a hole right in the middle that accommodates the handle, so you can fit
10:44the handle in that way too.
10:47Lots of stuff going on.
10:48So there's that option too as well.
10:51He has one other thing before I guess we kind of start tackling the different armor pieces,
10:54is that he also has a projection screen, giving us a little, I think this is the actual solar
10:58system where Val'kitar actually is located.
11:02It's nicely done here though in a translucent purple plastic.
11:05And this, because again it's using that same universal size peg, just plugs onto the, on
11:09his arm just like that.
11:10So you can have the figure actually looking like, looking as if he's looking like at his
11:14little screen there on his arm.
11:17Very, very cool.
11:18As for the actual configurable pieces though for him, again, a lot of this is all armor
11:22swapping it.
11:23You're going to pull out one piece, you're going to replace it with something else.
11:26As he is with it right now, the defaulted head sculpt when it comes out of the packaging
11:29is that actually of Sligo Riz himself.
11:31The head sculpt is fantastic though.
11:34It's been though a while since we've looked at Four Horsemen here on this channel, and
11:37you know, with the time that it's been away from this company, you know, some very large
11:42strides have been made when it certainly comes to paint applications.
11:45Love the look of the head sculpt here for Sligo Riz.
11:47Now again, you could choose to use this head for yourself if you wanted to, but he has
11:51also two other head configurations too.
11:54The head, by the way, does have a ball joint and you know, you can mix and match the parts
11:57that way.
11:58But again, just the striping that they've added to the face, some really very slight
12:01gradients of color as they airbrushed in.
12:04Really nice on the head sculpt, really like the look of this one quite a bit.
12:08But if you did want to though, he does also come with two other heads over here.
12:11So let's just stick with the configuration of armor as he is right now.
12:15He comes with two helmet pieces.
12:18Now again, the whole idea is if you want to make these as sort of just drone soldiers,
12:22spin this around so you guys can see, he comes with two configurations of helmets.
12:26One's a little bit more wider there on the top.
12:29One is a little bit more slimmer to the front.
12:30Looks a little similar to like a Xenomorph.
12:34With each of these, by the way, though, you can also take these visor pieces off.
12:38And these are just clipped in place by the way.
12:40And there's a little singular eye in the middle.
12:43Just a cool effect.
12:44It's especially cool the fact that they also did use purple plastic so that you can still
12:48see the sight sticking, beaming its way through.
12:52Now with this as well, you can also pull these parts off too.
12:56And he comes with a couple of, well, he comes with these extra larger domes.
12:59You have to remove the first thing first, and then there's a little, again, lip of plastic
13:03on either side.
13:04These just plug on.
13:05They're a little harder though to plug in place because you're feeling like you're not
13:10fitting them in the right place, but you get yourself like a larger visor.
13:14And there's also as well this version, which is basically, it looks to be very similar
13:18other than the fact they're not using the translucent purple plastic.
13:20They're using kind of, again, that metallic blue.
13:23That just pops off and then it swaps out with this head sculpt here too, or this visor piece
13:27as well.
13:28So there's lots of cool stuff you can do with these heads.
13:31Now to put this head onto the ball joint, it's the same size of ball joint, so you don't
13:35have to change out the parts at all.
13:37It just plugs in place, and then you can just choose which visor you want to use.
13:40So say if you wanted to use this head sculpt or this visor piece, it gives you a little
13:43bit more of a larger rim to the top.
13:46Or again, if you want to beeline it back to the original visor, and just drop that on
13:50the floor, we're just going to grab that piece later.
13:53That just plugs in place, and now you got yourself the smaller head sculpt.
13:57And that's just based on what we've done so far with this armor.
14:00Now there's that secondary piece of armor over there as well.
14:03So what we're going to do is we're going to take the head piece off.
14:05We're also as well going to take off this whole armor piece.
14:08So this whole top piece that has the canopy can be detached from the body that's underneath.
14:13All you'll do is just lift this up, and this pops right off.
14:18Super super easy to do.
14:19While it's actually off right now at least, there's a couple of other things you can do
14:22as well.
14:23He's got a little turbine piece, and that just clips into right in here.
14:28I think it actually clips...
14:30The prongs are a little on the smaller side, but I think it actually fits right in there.
14:35Although I'm having a little more of a struggle actually getting in there.
14:38But there's a little cyclone piece, a little turbine, that fits inside that little hole
14:42area there.
14:43You can also as well, I believe, take the shield pieces.
14:46I think you can take the shields.
14:47Oh, maybe not.
14:48Maybe you can't take the shield pieces for that.
14:49So with this configuration, then he does also have some additional shoulder pieces.
14:53These shoulder pieces would have been a little harder to do just because the way the armor
14:56was already set up.
14:58But if you see those holes that we were looking at before, the way that the shoulders are
15:02set up is that there's a peg right there, and then there's the holes right there.
15:05Those just plug in place.
15:08And we'll do the exact same thing on the other side.
15:12Plug it in place.
15:14And nothing is necessarily committing you to the idea that it has to always look the
15:17same way every single time.
15:19In fact, if anything, the selling point on this line is the fact that you could get yourself
15:22several of these, and then just change them to the exact configuration that you want.
15:26So again, you want to use that head sculpt, you can use that head sculpt.
15:29Hey, if you want to even beeline it back to Sligo or Riz, you can also use this head
15:32sculpt as well.
15:33You can change out the pieces that way.
15:36The only other configuration that he has, at least from armor, is that involves actually
15:40taking these armor pieces off, is that he also has this setup too.
15:45Now this setup, there's a slot on the back, which again, there's a little lip of plastic
15:50right there that should go then onto the slot on the back of his body.
15:53This is a little harder to fit in.
15:56You kind of have to fit it down on his shoulders and then slide it down in place before it
16:00latches itself onto his torso.
16:03Now already being that it's using and occupying this back area of his torso, there's then
16:08no way that obviously you can use the shoulder pieces.
16:11And with the way it is right now, you can go back, use the Sligo or Riz head sculpt,
16:14you can pop that in place.
16:16You can also as well, you can take the hoses, for example, and you take the hoses and you
16:20can attach them still to the back of the belt.
16:22So that's still accessible right there.
16:24You can also take as well an additional canopy piece and that just fits over top like that.
16:30I just want to make sure it's all the way on there.
16:32So you can have Sligo or Riz either though with the helmet over top of his head or, which
16:36you can also do too, they've given enough at least clearance.
16:39Say for example, you want to use this head sculpt, you can take the, actually maybe that,
16:45not that one.
16:46This is the wider one.
16:47So that's going to have a little harder of a time to get the dome over top of it.
16:51But you could at least use the slimmer head sculpt.
16:54Pop that in place and then this slides over top, just trying to get it over top of it.
16:59Like there we go.
17:00Just over top.
17:01So you can still use that alternate head sculpt.
17:03The only thing that you can't use is just this one because it's a little too wide.
17:09Popping off everything though and looking at the rest of the figures details.
17:12I mean, I know we've sort of spent how much into this review, just actually talking about
17:15things that are configurable on this.
17:17By the way, again, with it being modular, you can actually remove and swap the parts
17:20out if you happen to have picked up any of the other Cosmic Legion figures.
17:24For the rest of the detail on the figure, there's a lot of good paint going on here.
17:26Of course, you've got the metallic blue making up the majority of this, but you've got some
17:30really nice additional silver accents, some black underneath there as well.
17:33A lot of cool intricate details added there.
17:37And again, with all the parts being mix and matchable, really for you, you can decide
17:40for yourself exactly the way you want to have it configured.
17:43He does have these skirts though at the tops of his thighs.
17:46Now looking at the images online, I think the skirts were actually placed the opposite
17:49way where the longer length of the skirt was facing forward.
17:52I don't think there's a way to remove the skirts and swap them around, but they're fine.
17:57I mean, they're attaching actually here for the top of the belt, and it doesn't limit
18:00at all the articulation when it comes to the figure.
18:03Speaking of the articulation, I guess, should we start with maybe this head scope?
18:06Should we go back to Sligor's head?
18:08Okay, we'll stick with this head for right now.
18:10Head's going to be on a boulder, so already right away, the head moves up, it looks down,
18:13and you can also move it back and forth.
18:16That doesn't change at all depending on whether you use this head, you use the wider helmeted
18:20or you use Sligor's head.
18:21It's going to attach and have the exact same freedom to move with that ball joint.
18:26As for the shoulders, the shoulders are going to come out.
18:28Now, I did notice though the way that they've designed the shoulders can't really get further
18:32out from, say, for 45 degrees, about a 45 degree angle.
18:35In fact, one of the things that also come in clear with the Cosmic Legions is a little
18:39bit of a warning.
18:40The fact that once they come out of the factory line, some of the joints may have gotten a
18:43little tighter.
18:44So you may want to just be treading cautiously when it comes to getting these figures out
18:47of the packaging.
18:48If there's resistance at all to the joints, you may want to stop and just kind of heat
18:52things up a little bit with just a hairdryer.
18:54That's all you really need.
18:55Just take a few passes.
18:56That might be enough just to kind of soften up the joints.
18:58The arms, though, rotate all the way around.
19:00Sligor does have a hinge in the elbow, and the arm also does rotate back and forth.
19:05The hands, whatever hands you want to use, do swivel back and forth.
19:08They're not going to be able to swivel all the way around just because the way they've
19:11designed the gauntlet sticks a little further over the arm.
19:13So it's going to prevent the hand from a little bit being able to move all the way
19:16around, but that's fine.
19:18Upper torso is going to be on a bulge right, though.
19:20The legs do split out with a full bit of freedom.
19:22You can take the legs and move forward.
19:24You can move them back.
19:24There's a swivel at the top of the thigh.
19:26A single hinge only for the knee, but it does rotate at least the lower leg.
19:30The ankle moves up and down.
19:31The ankle rocks back and forth as well.
19:33And the figure does have, still, peg holes in the undersides of the feet, even though
19:36really none of the Cosmic Legion figures have come included with display stands.
19:40You know what?
19:41Again, this is the first time, honestly, that I've looked at the Cosmic Legion's figures.
19:44I've seen them online.
19:45Various different online sites have listed these before.
19:48And I've always wanted to really pull the trigger, but just with all the budget that
19:52I always kind of sign for other things I want to look at on this channel, I have never really
19:55gotten a chance.
19:56Seeing, though, now in hand what they've done with the Cosmic Legion's, I can certainly
19:59see why this line has such a large following.
20:02Not only are the figures detailed and super poseable, but the sell of this is obviously
20:06the fact that you can mix and match and have modular pieces changed around.
20:09Not only changing out the parts and pieces that come included with Slygor Riz, but if
20:13you are also collecting Cosmic Legion figures, apparently you can also mix and match the
20:17parts with those other figures as well.
20:19We started, though, with Slygor Riz.
20:21We're going to continue the review at least with one other figure, and that's going to
20:24be coming up in the upcoming review.
20:25But I am really liking this line so far, and I can certainly see again why there's such
20:29a large fan base behind it.
20:31Slygor Riz is not only just a fun figure to look at and a fun figure to pose, but also
20:35a fun figure to mix and match the parts with.
20:38With all the parts, honestly, that he comes included with, there's no real way to settle
20:42on one look.
20:43You'll always find yourself, I found myself at least, always wanting to change out the
20:46parts and swap it out with something else that he came included with.
20:50By the way, though, that little turbine piece I was having a problem with before, eventually
20:54I did get that in there.
20:55So it's lodged very firmly in place into the front of his torso.
20:58I've got then the staff in his one hand, the shield in the other, even though it's not
21:02really in his hand, it's actually attached onto his forearm.
21:05The benefit, though, of these modular parts and the benefit of the fact that they're using
21:09universally sized holes means that you don't have to settle on one idea alone.
21:13If you change your mind down the road, you can attach the shield onto his arm rather
21:17than in his hand.
21:18You can attach the shield onto the back of his body.
21:20Though with certain configurations, like the canopy he has right now in the back of his
21:23torso, there's no way then you lose, obviously, those extra shoulder pieces because those
21:28holes are now concealed.
21:29But there's a lot of, again, parts that you can change out to the figure.
21:32Now with Slygor Riz and some, in fact, of the other Cosmic Legion figures, they're
21:37available on site right now in various online sites where you normally pick your figures
21:41up from, and they're actually on sale.
21:43BBTS, in fact, if you guys are interested, Slygor Riz, I think has been marked down by
21:46about 20%.
21:48He was those selling originally for around $70.
21:50He's selling now for around $55, about $56 when it's all said and done.
21:54Figure, though, I would certainly recommend if you're kind of on the fence about getting
21:58into, because let's just say, I mean, I'm in that situation myself.
22:02Do I want to start to branch off and get into collecting anything else?
22:05I'm already collecting so many things as it is.
22:07Honestly, though, with what I've seen here with the Cosmic Legion, Slygor Riz, I could
22:11really see myself going down the rabbit hole real fast and collecting more of these.
22:16Again, this guy is available online.
22:17Some of the sites do have a markdown.
22:19So if you guys are kind of interested to test the waters with the Cosmic Legions, I think,
22:22honestly, Slygor Riz is a good figure to test those waters with.
22:26Big thank you, once again, to the folks over at Four Horsemen that provided the sample
22:29of the Cosmic Legion's Book Two, Grave Knight Slygor Riz, Grave Keeper, that we could have
22:34the chance to have a look at this review.
22:36What do you guys think of the figure?
22:37Let me know down below in the comment section.
22:38Have you guys also been collecting any of the Cosmic Legion figures?
22:41And if you have, which ones do you have in your collection right now?
22:44If you guys also certainly did enjoy this video, I want to throw it a like.
22:47If you guys are loving the content you guys are seeing and want to stick around for more,
22:50we are going to be, by the way, wrapping up things, sad to say for Slygor, but there's
22:54going to be a review again of another Cosmic Legion's figure in the pipeline.
22:57So that's going to be coming up shortly here on this channel.
22:59Making sure you're hitting that subscribe, making sure you're turning on the bell notification,
23:02making sure you're coming back.
23:05As always, guys, thanks for watching.
23:07See you guys next time.